Quote:
Originally Posted by Grant66
Any idea how they measure the db, distance position etc?
And do you need full leathers for the track? Remember there was some debate last year.
|
Taken from their website:
http://www.castlecombecircuit.co.uk/...nformation.asp
The noise limit for the day is 105 db(A), which is measured at ½ metre from the exhaust outlet at ¾ maximum revs. It is the rider’s responsibility to ensure that their machine is within this limit. All machines are sound tested prior to going out on the circuit. In the event of a machine failing the sound check, then the rider will be entitled to a 75% refund. If you are unsure if your bike will get through the noise test (i.e. if it is fitted with an after market exhaust system), then you can always come over to get the bike noise tested prior to booking a place.
Riders need to have a full face helmet, and either one or two piece leathers. If they are two piece, then these must zip together either fully or partially. Boots and gloves must be of leather construction and carry no metal studs. It is strongly recommended that additional back protectors be worn whilst on the circuit.
This is for trackdays, not sure if bikesafe will have to comply with this?