CHEAPEST around Curvy SV Parts + Prices

Hiya All,

I have now broke my SV and its in a million bits in my shed. So if you need anything send me a pm or a email.
I have compiled a list of parts and prices so if you need anything just let me know. The prices are the cheapest around, cheaper than ebay.

If you buy multiple items postage will be combined.

Small items will be about £5.00, medium £10 - £15 and large ones will be £20.

The parts i have are as follows.

Parts i have left.

L + R Mirrors - £20.00
Clutch Cable - £5.00
Subframe - £50
Clock Bracket - £35
Clocks - 30,000 mile - £40
Rear Light - £15
Wire Harness + FuseBox - £40
Starter Solanoid - £10
Rear Brake Switch - £5
Grab Rail - £5
Vacume System - £5
ECU / CDI - £20
Clutch Lever and Clamp - £5
HT Leads - £25
Headlight Wire Loom - £10
Seat Lock - £5
Lock Set with 2 Keys - £70
Frame, with V5 logbook and 2 No. plates, Never been crashed - £250
Suspension Linkage - £10
Pillion pegs and hangers, loose footpegs - £10
Stand and Switch - £10
Front Spindle - £5
Rear Brake Cylinder and resvoir - £15
Left Clip On - Grinded down, still usable - £10
Right Switchgear/Throttle - £15
Bottom Yoke and Stem - £30
Top Yoke - £15
Anti Freeze Bottle - £5
Chain Adjusters - £5
Hi Level Exhaust and Standard Can and downpipes - £80
Radiator and Fan - No leaks - £75
Airbox and filter - £20
Infill panels - £10
Rear Calliper Mount - £5
Pillion Seat - £10

If you need any parts send me a email.

Yatzie

What area do live?

You got a pic of the heelplates?

Also, The disc bolts - 15 ot them I take it? Are the polished? Titanium? Or just clean?

You still got the forks?

Hiya,

Im from West Cornforth, near County Durham.

The disk bolts are just really clean, nice and shiney. All bolts for front and back disks. Sorry dont have any pictures of heel plates. They are the ones that have SV650 laser cut from them. Might be a sample on enbay cos thats where i got them.

Sorry sold the forks.

Hope this helps

Need a front and rear spindle that are in goodish condition?

Yes i have a front and rear spindle. £23.00 and there your, posted to you.

My paypal address is david.yates@durham.gov.uk.

They both straight and nuts are not rounded.

Ok mate please call this a yes i will have them but first i need to PM Billy and ask if spindles are standard SV parts, cos i have GSXR front end on it. Shouldn't think they will be any different, i'll PM northy too.

Cheers mate.

PM sent re swingarm & torque arm.

Originally Posted by Hooligan

Sorry dont have any pictures of heel plates. They are the ones that have SV650 laser cut from them. Might be a sample on enbay cos thats where i got them.

Same as these, only polished?

Yes they are the same as the ones above, only polished.

Thanks for the picture.

Hooligan