Curvy gauges went dark,HELP?

Hi all, My 01 svs gauges recently went out(U.S. model BTW)I have checked the fuses under the seat,and all connections I can think of. The bike will start right up,no problems. Any ideas? Are their fuses in the gauge cluster I am missing?
Thanks for any help

[yorkie_chris]

Get a wiring diagram and a multimeter/test light, check that the connector to the clocks has power at the right pins.

If that checks out alright then replace the bulbs.

Originally Posted by yorkie_chris

Get a wiring diagram and a multimeter/test light, check that the connector to the clocks has power at the right pins.

If that checks out alright then replace the bulbs.

Thanks for the reply,everything on the gauges is dead,tach,lights,whole shebang.I was able to test the lights out of the unit and the light work when I route power to it form another source.The bike will start but there is no responce from the gauges.

[yorkie_chris]

Ah ok, well either the meter fuse is blown or a wire is broken.

IIRC the gauges get a permanent live feed, and a switched one, but double check the fuses first

Originally Posted by yorkie_chris

Ah ok, well either the meter fuse is blown or a wire is broken.

IIRC the gauges get a permanent live feed, and a switched one, but double check the fuses first

Good call on the broken wire,thanks for the help. It is sorted now.