 |
 |
22-05-08, 05:03 PM
|
#1 |
|
Guest
Posts: n/a
|
K6-K7 Pipework
Is there a difference between the pipework on a K6 to a K7.
Only asking as I have heard somewhere that the K7 has a cat built into it near the collector box thingymajig...... |
|
|
22-05-08, 06:19 PM
|
#2 |
|
Member
Join Date: Mar 2008
Location: Trowbridge, Wiltshire
Posts: 490
|
Re: K6-K7 Pipework
The K7 has an oxygen sensor between the collector and the weld. Some crap for emissions apparently.
|
|
|
|
22-05-08, 06:30 PM
|
#3 |
|
Guest
Posts: n/a
|
Re: K6-K7 Pipework
So, does this mean that they are not interchangable ????
|
|
|
|
22-05-08, 11:21 PM
|
#4 |
|
Member
Join Date: Mar 2008
Location: Trowbridge, Wiltshire
Posts: 490
|
Re: K6-K7 Pipework
I can't see how putting pipework without the sensor on will cause a problem. There are no full systems available that include an option to fit it back onto the pipework. I'm not entirely sure what needs to be done with the sensor once it's taken out, but if you don't have one it shouldn't be a problem.
If you're looking to put K7 pipework onto a K6, then obviously you'll need to blank off the hole. I believe there's packing of some description just below where the sensor goes in too, but as far as I know that could be standard on any model year. |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cheaper 99-00 Akrapovic pipework | leesvee | SV Talk, Tuning & Tweaking | 0 | 29-06-07 08:17 AM |
| Remus Hi level pipework | Jelster | SV Talk, Tuning & Tweaking | 4 | 02-03-06 07:33 PM |
| k2 pipework on a K4 | Sudoxe | SV Talk, Tuning & Tweaking | 4 | 09-05-05 10:27 AM |
