Removing a Datatool alarm - wiring assistance please.

Hi new to the forum thought i would join up i ride a sv1000 svz k5 and my wife rides a sv650 k4 (naked, the bike that is lol).


the problem I'm having is this had to remove a datatool alarm system 3 from my wife's bike as it was fried!!!! . i have removed it and now i am left with 4 wires same colour combo i have a permanent live , 2 x switchable lives one of which comes from the fuse box tagged to ignition fuse and one which comes from the back of the bike from a small white connector with 5 black white wires going in /out and my one white looks like this is linked to indicators? every thing works except her fuel pump! when i reconnect the battery rev counter goes up to 7k then back down and chec is up if i put a ground to the fuel pump i can get it to spin but doesn't stop (think it was to the orange on the fuel relay , it was dark at 10pm last night) totally lost with this have spent 2 days on it and can't figure it out i have looked at several wiring diagrams and can not find these wires they are solid black with a green dot it's a k4 650 naked .,Is the naked wiring diagram different to the half fared??? i have had some one look at it and he says it could be the ecu or fuel pump relay but the bike worked fine up to me taking the alarm off.

cheers in advance Craig (stressed)