Paging anyone with a Yamaha 250 or 350LC - SV650.org

30-10-08, 12:29 PM

I need to know what the length of the forks is when fully extended please, also how far apart the forks are mounted. An overall measurement from outside of one leg to outside of the other would suffice as the diameters are the same on the project I'm planning.

Thanks

RingDing · 30-10-08, 12:50 PM

Not sure if I'll get a chance to check tonight but I can measure mine up. Might have to wait until Fri evening is all...

30-10-08, 01:05 PM

Quote:

Originally Posted by RingDing

Not sure if I'll get a chance to check tonight but I can measure mine up. Might have to wait until Fri evening is all...

That'll be fine, there's no immediate rush.

Thanks

RingDing · 30-10-08, 05:50 PM

Got home earlier than expected.

Top of fork to center of axle = 738mm

Outer edge of one fork to the other = 210mm

Accuracy of approximately 2mm I'd say.

Couldn't get a center to center measurement on the forks as the bar mount gets in the way. If I can find the spare yoke in the shed at the weekend I can measure that for you.

Good luck with the project, looks interesting.

30-10-08, 11:31 PM

Thanks so much, that's helped greatly.

RingDing · 31-10-08, 07:04 AM

No worries.

30-10-08, 12:29 PM	#1
Lozzo Guest Posts: n/a	Paging anyone with a Yamaha 250 or 350LC I need to know what the length of the forks is when fully extended please, also how far apart the forks are mounted. An overall measurement from outside of one leg to outside of the other would suffice as the diameters are the same on the project I'm planning. Thanks

30-10-08, 12:50 PM	#2
RingDing Member Join Date: Nov 2005 Location: Bristol Posts: 416	Re: Paging anyone with a Yamaha 250 or 350LC Not sure if I'll get a chance to check tonight but I can measure mine up. Might have to wait until Fri evening is all... __________________ http://ridingalongwayslowly.blogspot.co.uk/ 3x Honda C110 - phut-phut-phut KTM Duke 690 - brum-braaaaaaa!!!!! BSA C25 - brum-braa-braa RD350LC Ring-ding-phut-clatter-££££££

30-10-08, 05:50 PM	#4
RingDing Member Join Date: Nov 2005 Location: Bristol Posts: 416	Re: Paging anyone with a Yamaha 250 or 350LC Got home earlier than expected. Top of fork to center of axle = 738mm Outer edge of one fork to the other = 210mm Accuracy of approximately 2mm I'd say. Couldn't get a center to center measurement on the forks as the bar mount gets in the way. If I can find the spare yoke in the shed at the weekend I can measure that for you. Good luck with the project, looks interesting. __________________ http://ridingalongwayslowly.blogspot.co.uk/ 3x Honda C110 - phut-phut-phut KTM Duke 690 - brum-braaaaaaa!!!!! BSA C25 - brum-braa-braa RD350LC Ring-ding-phut-clatter-££££££

30-10-08, 11:31 PM	#5
Lozzo Guest Posts: n/a	Re: Paging anyone with a Yamaha 250 or 350LC Thanks so much, that's helped greatly.

31-10-08, 07:04 AM	#6
RingDing Member Join Date: Nov 2005 Location: Bristol Posts: 416	Re: Paging anyone with a Yamaha 250 or 350LC No worries. __________________ http://ridingalongwayslowly.blogspot.co.uk/ 3x Honda C110 - phut-phut-phut KTM Duke 690 - brum-braaaaaaa!!!!! BSA C25 - brum-braa-braa RD350LC Ring-ding-phut-clatter-££££££

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paging Hovis	plowsie	Idle Banter	4	03-04-09 08:07 AM
Paging Law	Lozzo	Idle Banter	10	22-12-08 12:36 PM
Ed - Paging Ed	Flamin_Squirrel	Idle Banter	2	16-01-08 10:26 PM
Paging VB - Pen Y Fan	DeanoN	South & West Surfers	9	23-08-06 09:05 PM
Paging Sid Squid.	Scoobs	Idle Banter	9	12-03-06 06:20 AM