 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
16-05-09, 09:21 PM
|
#1 |
|
Guest
Posts: n/a
|
Lean rear cylinder
I have a 02 minitwin track bike ,it has BMC filter ,full akro system and dyna jet kit ,I changed the plugs to iridium and found it was running rough in the lower revs ,I removed the tank spacers and it improved a bit but I have just removed the plugs and found the rear plug is white and the front normal,I think it may be a rear blocked main jet as the bike was stood for two years after my brother had a bad crash at snett,I used it at Llandow and it was ok but after changing the plugs I did pembrey and the troubles started ?.
|
|
|
16-05-09, 10:17 PM
|
#2 |
|
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,569
|
Re: Lean rear cylinder
try increasing the gap on the iridium plugs... if its 7 standard then go to 7.5-8...
|
|
|
|
16-05-09, 10:22 PM
|
#3 | |
|
Guest
Posts: n/a
|
Re: Lean rear cylinder
Quote:
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| rear master cylinder | Bibio | SV Talk, Tuning & Tweaking | 3 | 08-05-09 02:40 PM |
| Rear Cylinder not Firing | stnd | SV Talk, Tuning & Tweaking | 16 | 16-05-08 04:31 AM |
| rear cylinder problem | Jaco | SV Talk, Tuning & Tweaking | 3 | 25-05-06 08:10 AM |
| Q) Why isn't my rear cylinder firing? | northwind | SV Talk, Tuning & Tweaking | 3 | 05-10-04 05:22 PM |
| rear cylinder dead | Nurf | Idle Banter | 0 | 07-01-70 02:19 PM |
