SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
I just got the headlight and clocks off and some of the plugs were a swine to separate, they're all grey and corroded....
Should I spray with WD40 or does the .org have anything better in mind? |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
give them a very light smear with some grease- done it with mine and haven't had stuck connectors since.
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Sillicone grease?
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
just used normal
|
![]() |
![]() |
#5 |
Where the hell am I?
Mega Poster
Join Date: Dec 2004
Location: Swingin' thru the urban jungle
Posts: 7,451
|
![]()
if they are very greyed i give em a bit of a rub with fine grade wet and dry too, just so the connections are connecting well.
__________________
. "Computers are great! Not for communicating tho. They have one fundamental flaw ... they don't have eyebrows." AlpineCarStereo: you win ....... eeerrr ..... ummm ..... my undying support of you, the greatest Mod this forum has ever known. My Leige. davepreston: ![]() |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Contact cleaner and even Cillit Bang have been recommended . With contacts I don`t like to spray loads of stuff in there , I prefer to spray it into the lid of the can and apply it to contacts with a cotton bud in case you cause further problems with swamping connections with fluid .
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
but if I use cillit bang, they'll be gone...
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front forks are corroded. | Elio | SV Talk, Tuning & Tweaking | 7 | 27-02-09 01:03 AM |
Oil Cooler Connections | buckstone | SV Talk, Tuning & Tweaking | 5 | 17-03-07 09:33 PM |
Indicator connections - Front and back | ScubaSteve1234 | SV Talk, Tuning & Tweaking | 4 | 14-03-07 09:09 AM |