SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
right think i have a second hand loom on way to me but been looking at my wife's loom again been through all the wires with a wiring diagram and cant find any thing wrong apart from this little box with one black wire with no where to go , does any one know what this little white box is and purpose see attached pic.bike ran fine before i took alarm off is it possible alarm Way masking a problem? cheers Craig
Last edited by sz1; 04-10-09 at 02:45 PM. |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2008
Location: crowborough, East Sussex
Posts: 1,061
|
![]()
what bike is this one ?
__________________
Curvy With Lots Of Bits ...
But Still More To Come ![]() |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2008
Location: crowborough, East Sussex
Posts: 1,061
|
![]()
do you now if the loom had anything done to it before you owned it. for example had a alarm fitted
__________________
Curvy With Lots Of Bits ...
But Still More To Come ![]() |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
yes i took alarm off looked simple as i dint have to break any connection as the alarm was just tagged to wires , removed it very carefully but some how ended up with one left with no where to go it's been a night mare....
|
![]() |
![]() |
#6 |
Member
Mega Poster
Join Date: Jul 2008
Location: crowborough, East Sussex
Posts: 1,061
|
![]()
grim the only thing i would do now is use a haynes manule and go thourhgt all the wires untill i find one that is missing or have a look at one in another bike apart from that im clueless
__________________
Curvy With Lots Of Bits ...
But Still More To Come ![]() |
![]() |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
that one wire is prob the Ing live to the fuel pump! it ataches to another wire the same colour, i came across this when i removed my datatool 3 from my bike, if i was nearer i would come and ave your bike started in minutes!
|
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
just some sort of aux plug! ive got two in the tail and one in the nose they dont seam to do anything mayby for aftermarket stuff??
|
![]() |
![]() |
#10 |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
![]()
the black box (center in pic) with 4 wires, from what i remember is a common earth bridge, take the cap off and there should be a peice of metal bridging all connections
white 2 wire connector is usualy the rear numberplate light in a sec ile go and get the pointy loom i have in the shed
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Curvy fork identification? | herbie | SV Talk, Tuning & Tweaking | 6 | 05-03-09 12:24 AM |
Engine identification? | aln | Bikes - Talk & Issues | 21 | 17-01-09 11:43 AM |
Lower fairing identification... | Gnome | SV Talk, Tuning & Tweaking | 4 | 29-03-08 09:42 PM |
SV1000 part Identification | Mark_h | SV Talk, Tuning & Tweaking | 15 | 22-11-07 12:23 PM |
Ohlins Shock (model identification) | ASM-Forever | SV Talk, Tuning & Tweaking | 2 | 01-04-07 11:27 AM |