SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
1999 SV650 won't start.
Neither cylinder has a spark but 12.5V is going to both coils. Electrics work, engine turns over etc. The last two times I started the bike before the time wouldn't start, it was hard to start, but once going seemed absolutely fine. I have changed the plugs, still no spark. I have remove one of the spark plug caps to check for a spark directly from the HT, still no spark. The is around 12.5V going to the coils with the ignition on, when i crank the engine this drops to around 9.5V, is this correct? I have checked the pulse generator coil as per the manual, the resistance of it was within the acceptable range and there was no continuity between it and ground. I have a multimeter and a manual, what should I try next? Thanks |
![]() |
![]() |
#2 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
9.5 a little low, try pop it on charge for a bit, eliminate that easy one first.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
A question about coils | hardhat_harry | SV Talk, Tuning & Tweaking | 7 | 10-11-09 09:07 PM |
Ignition Coils - Anyone got a set? | kbh | Stuff Wanted | 2 | 08-08-09 12:14 PM |
Tesla coils... well I NEVER! | Ping | Idle Banter | 13 | 13-07-07 02:24 PM |
ignition coils | stumpy1 | SV Talk, Tuning & Tweaking | 10 | 22-06-06 05:31 PM |
Coils | Iansv | SV Talk, Tuning & Tweaking | 6 | 28-01-05 09:41 AM |