fitting rearset...a little help required please

So as the title suggests im fitting my GBmoto rearset and would like to know if i should have any grease or lube or what ever it is you real bikers use.
Second thing, is there an order in which to do this job, like undo this before you do this and so on..

All help welcome

Cheers

[yorkie_chris]

It's pretty much a case of unbolting old and fitting new ones.

Crack the bolts free on the master cylinder before removing the old rearset.

Shouldn't need to grease anything if the levers run on roller bearings (instead of plain bearings). Might want to use a bit of medium loctite on all the fasteners though.

Originally Posted by yorkie_chris

It's pretty much a case of unbolting old and fitting new ones.

Crack the bolts free on the master cylinder before removing the old rearset.

Where might I find the master cylinder then bud (just bought a haynes manual from ebay)

Originally Posted by Scoobs

Shouldn't need to grease anything if the levers run on roller bearings (instead of plain bearings). Might want to use a bit of medium loctite on all the fasteners though.

Whats loctite and is that something you would find in a motorcycle shop, better asking here so i dont look like a plonker face to face

[yorkie_chris]

That thing on rearset that rod from brake pedal shoves into

Originally Posted by yorkie_chris

That thing on rearset that rod from brake pedal shoves into

If you had a picture that would be great if not do you mean the bit that is attached to the bike with a rubber gromet over

one more question, am doing the r/h side now but im not sure how the banjo connects because the one on at the moment has the banjo connected to the rearset its self, if that makes any sense...

Cheers again