Where can I get an M10 x 1.00 double banjo bolt from? - SV650.org

05-09-10, 07:15 PM

Tried to fit my new HEL braided lines today but they have sent me the wrong double banjo bolt for the front master cylinder. They have sent a M10 x 1.25 instead of a M10 x 1.00.

Anyone know where I will be able to get a stainless one from, ideally by tomorrow?

Thanks.

05-09-10, 07:18 PM

Bike shops will sell them, my local one does as they are goodridge dealers and their lines all have seperate fittings

christopher · 05-09-10, 07:41 PM

If you speak to HEL they should get you one out next working day. Depends how soon you need your bike functional if you can wait till Tuesday at the earliest.

05-09-10, 07:58 PM

I emailed them this afternoon but no reply as of yet. Will see if they get back to me before dinner time tomorrow.

05-09-10, 08:02 PM

remember they might be closed on a sunday

Sid Squid · 05-09-10, 08:10 PM

Do you have the kit of lines that go one from the m/cyl to one caliper, and then over the mudguard to the other caliper?

Depending on exactly which bike you have this might, (note; might), account for the double banjo at the caliper and thus the 'other' thread, just a thought.

05-09-10, 08:23 PM

I *think* I have the kit with 2 front lines that each run from the master cylinder. That's the one I ordered anyway and the length of the lines seems right for this setup. I'll take some pics tomorrow of how I've got it set up and will see if it looks okay.

05-09-10, 08:29 PM

BTW, is the pitch the same on the rear master cylinder on a curvy as I have just realised that all the other bolts are also 1.25 pitch. (Not got round to doing the rear yet) Will I have to get another M10x1.25 bolt for the rear?

Edit, scrap that. Just realised that the rear line does not run directly from the master cylinder but from the lever itself.

yorkie_chris · 06-09-10, 07:29 AM

IIRC it is fine pitch on rear MC but can check if you've not looked at yours yet

06-09-10, 10:05 AM

I've just had a search and you're correct YC. It seems that the rear MC is a fine pitch like the front on the curvy. Thanks for the offer though.

05-09-10, 07:15 PM	#1
radicalry00 Guest Posts: n/a	Where can I get an M10 x 1.00 double banjo bolt from? Tried to fit my new HEL braided lines today but they have sent me the wrong double banjo bolt for the front master cylinder. They have sent a M10 x 1.25 instead of a M10 x 1.00. Anyone know where I will be able to get a stainless one from, ideally by tomorrow? Thanks.

05-09-10, 07:18 PM	#2
Specialone Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? Bike shops will sell them, my local one does as they are goodridge dealers and their lines all have seperate fittings

05-09-10, 07:41 PM	#3
christopher Member Join Date: Apr 2009 Location: Chester, UK Posts: 795	Re: Where can I get an M10 x 1.00 double banjo bolt from? If you speak to HEL they should get you one out next working day. Depends how soon you need your bike functional if you can wait till Tuesday at the earliest.

05-09-10, 07:58 PM	#4
radicalry00 Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? I emailed them this afternoon but no reply as of yet. Will see if they get back to me before dinner time tomorrow.

05-09-10, 08:02 PM	#5
sunshine Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? remember they might be closed on a sunday

05-09-10, 08:10 PM	#6
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Where can I get an M10 x 1.00 double banjo bolt from? Do you have the kit of lines that go one from the m/cyl to one caliper, and then over the mudguard to the other caliper? Depending on exactly which bike you have this might, (note; might), account for the double banjo at the caliper and thus the 'other' thread, just a thought. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

05-09-10, 08:23 PM	#7
radicalry00 Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? I think I have the kit with 2 front lines that each run from the master cylinder. That's the one I ordered anyway and the length of the lines seems right for this setup. I'll take some pics tomorrow of how I've got it set up and will see if it looks okay.

05-09-10, 08:29 PM	#8
radicalry00 Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? BTW, is the pitch the same on the rear master cylinder on a curvy as I have just realised that all the other bolts are also 1.25 pitch. (Not got round to doing the rear yet) Will I have to get another M10x1.25 bolt for the rear? Edit, scrap that. Just realised that the rear line does not run directly from the master cylinder but from the lever itself. Last edited by radicalry00; 05-09-10 at 08:34 PM.

06-09-10, 07:29 AM	#9
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Where can I get an M10 x 1.00 double banjo bolt from? IIRC it is fine pitch on rear MC but can check if you've not looked at yours yet __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

06-09-10, 10:05 AM	#10
radicalry00 Guest Posts: n/a	Re: Where can I get an M10 x 1.00 double banjo bolt from? I've just had a search and you're correct YC. It seems that the rear MC is a fine pitch like the front on the curvy. Thanks for the offer though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
banjo bolt woes.	monkimagic	SV Talk, Tuning & Tweaking	7	19-03-10 11:31 AM
Double banjo brake bolt with bleed nipple	northwind	For Sale - SV's and SV related items	6	13-02-10 06:53 PM
Rear Banjo Bolt Size	Sideshow#36	SV Talk, Tuning & Tweaking	2	06-07-09 10:31 AM
braided hose banjo bolt question	Marksv	SV Talk, Tuning & Tweaking	2	25-08-07 08:36 PM
Banjo bolt	lukemillar	Stuff Wanted	3	26-07-06 11:32 AM