Exhaust hanger for M4?

Right chaps ..

Picked up a slip on M4 as some of ye know / remember , i've checked it and it slips on fine with the link pipe provided so tis all good ..

Only issue i have is it's slightly higher then my current can thats connected to my rear right hand foot peg, as per the norm.

When i fitted it it sits slightly up around the foot peg area ... it dosent seem to be high enough to need a race hanger ...

Anybody know what kind of one i need ?

Something fancy would be nice

bhaumppp..

Nobody want to make a stab at this for me ? i can provide pictures

I have an R&G hanger on my M4 can, but that hanger just placed the exhaust exactly where it is as standard.

You sure you haven't f****d it up and cut the exhaust in the wrong place? Or got the wrong link pipe?

i have R&G as above but yeah sit in exactly same place as standard footpeg/hanger

pics of link pipe/where u have cut stock pipe might be helpfull

Pictures shall be sourced !!!

I have an after market on here already, so the cut was done aggess ago ..

Maybe i just need to rejig the link pipe,so it dosent quite sit up as high, the peg is 100% in the way of the can as is ..

d..

Ok whats wrong with this picture ...

The link pipe seems to be too long, altho it does fit ...

Current End can


M4 fitted ( kinda )



M4 from the rear

The link pipe is far too long, are you sure you have the right one?

Originally Posted by madness

The link pipe is far too long, are you sure you have the right one?

Seems i dont have the rite link pipe ... time to find a new one

It looks to me that the original pipe has been cut too far back but wait for someone to confirm this b4 u start hacking !!

As I'm not familiar with the curvy exhaust