![]() |
#1 |
Member
Mega Poster
Join Date: Jul 2003
Location: W Mids
Posts: 2,037
|
![]()
Finally got round to fitting the Veypor I got last year to my 700.
One bit of old 2mm aluminium ![]() Old piece of 2mm aluminium Make up a spacer for the back ![]() Spacer made up for Veypor A bit of work and one bracket ![]() Bracket fitted From the back ![]() From the back and here's the 'riders eye' view. ![]() Riders Position Just need to properly wire it up now, I just nicked power from the temp gauge for the pictures. Druid
__________________
'00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F |
![]() |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2006
Location: Dundee
Posts: 4,414
|
![]()
Bit squint?
Will the gear indicator work |
![]() |
![]() |
![]() |
#3 | |
Member
Mega Poster
Join Date: Jul 2003
Location: W Mids
Posts: 2,037
|
![]()
In what regard? The tacho is turned slightly to the right (the Elliot isn't horizontal), and its turned in (towards the rider) and up slightly (the back isn't actually flat but is angled). It's tight as hell where it is, the fairing (while not fitted atm) is about 5mm away from the top left corner, the clutch cable misses the front by about 10mm! Made it rather tricky to fit and I don't think the camera helps.
Quote:
It's even meant to work out fuel consumption based on riding history which I find amazing. We'll see. Druid
__________________
'00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F Last edited by fastdruid; 18-11-10 at 11:27 PM. |
|
![]() |
![]() |
![]() |
#4 | ||
Member
Mega Poster
Join Date: Jul 2006
Location: Dundee
Posts: 4,414
|
![]() Quote:
Quote:
![]() |
||
![]() |
![]() |
![]() |
#5 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#6 |
Member
Mega Poster
Join Date: Jul 2003
Location: W Mids
Posts: 2,037
|
![]()
I care not for mpg (apart from a curiosity POV). If I did we'd sell the RX-8, buy a diesel and drive slowly.
![]() It does get though a depressing amount of petrol on track days though, I estimate mid-teens... I wonder if we could make oil from hippies? Druid
__________________
'00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F |
![]() |
![]() |
![]() |
#7 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Sure
![]() We'd need to grind them up and ferment them, then reform the methane produced into other hydrocarbon stuff. Seems like a plan... could even use the THC and little-red-book rich sludge left over as fertiliser on some sort of organic farm to produce more hippies!
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
What bike is it on and what is it?
|
![]() |
![]() |
#9 |
Member
Mega Poster
Join Date: Jul 2003
Location: W Mids
Posts: 2,037
|
![]()
A very heavily modified curvy SV650S and its a veypor VR2 - http://www.veypor.com/ Essentially its a datalogger, tracks acceleration, speed, rpm and gives all sorts of figures out. Plus it doubles up as a speedo.
Druid
__________________
'00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F Last edited by fastdruid; 20-11-10 at 07:00 PM. |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
Looks good and expensive lol. Why the black tape on the rev counter?
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Veypor again | northwind | SV Talk, Tuning & Tweaking | 11 | 26-04-08 06:43 PM |
A discovery- monkeying about with Veypor kit | northwind | SV Talk, Tuning & Tweaking | 4 | 08-01-07 10:29 AM |
setting up a veypor | tomjones2 | SV Talk, Tuning & Tweaking | 4 | 21-05-06 11:03 AM |
Another Veypor review | Keitht | SV Talk, Tuning & Tweaking | 0 | 15-04-05 01:57 PM |
Veypor fitting guide | northwind | SV Talk, Tuning & Tweaking | 0 | 05-12-04 02:22 AM |