sv650 s Curvy restrictor washers wanted ASAP!!

I need sv650 s restrictor washers asap!!

i can give you the diemensions of them if that will help and then you can get some made up?

i'd let you have mine but i still need them for a while

From looking at a curvy. How would you tell if its full power or restricted? Or whats the easiest way to tell by taking least amount of parts off?

Hello mate.

Just want to get things straight.

You have a curvy sv650 correct? (aka 99-02 model)
You want to restrict to 33bhp from full power?
You want the part that goes in the carburetor?

That would be part 6: Valve piston here CLICK

If so i have my old ones ill sell you them cheap cost me £40+ postage. I did use them so if I give them to you £20 posted? Seeing as you are a member of the org!

Originally Posted by daved407

From looking at a curvy. How would you tell if its full power or restricted? Or whats the easiest way to tell by taking least amount of parts off?

just by looking at them you cant. mines a curvy and restricted. it doesnt rev up to 9,000 like they should, it hits 7,500 and it tops out at 90 but i've had 100 with a tail wind

to look at the retrictors on a curvy you do this;

take off small panels under the front seat
then front seat off
front tank bolts off
lift tank up and put somthing in like a hammer to hold it up
take the airbox off
undo throttle cables( you might not have to but i do)
undo the hose clamp things under the carbs and then pull thenm off a bit(be careful becasue there are still fuel lines attached)


thats the easiest way that i no on how to do it. any questions just ask

Cheers Mykey.M We got a curvy with 217Km on the clock. Not been used since i got it for my wife and i wanted to know whether it was restricted or not with view to selling it.