Look what i had made! - SV650.org

04-10-13, 08:46 AM

Goin to fit its this weekend, boys at work made it for me for a small donation.

Shawthing · 04-10-13, 11:12 AM

OK. Put us out of our missery.
Where are you going to Stick it?

I say stick as there do not seem to be any mounting holes.

Bibio · 04-10-13, 11:20 AM

i'll take a guess and say its a tail tidy, tidy to cover the gaps

04-10-13, 03:05 PM

Yea its ma tail tidy I had made up, Iv got a overlay for the mounting holes so ill see how it goes this Sunday I hope.

04-10-13, 07:32 PM

How much for them to do all your panels like that? Be a bitch to clean but defo one trick looking ride

04-10-13, 08:02 PM

Looks like aluminum of some sort. Do you know the alloy? I'd anodize or alodise it, then coat it with epoxy primer and good quality paint, then be sure to not have any contact between steel fasteners and the aluminum part. Unless you don't want it to last very long.
Actually I looked again, and it looks like stainless steel. The weld threw me off, since it looks like a weld in aluminum.

04-10-13, 08:11 PM

Yea its stainless, the boys knocked it together as a feebe for me

but I'm sure I can get others made too if anyone is interested, can also get it painted black if ya like, this is a kinda prototype atm, but like I said ill fit it on Sunday all goin well and well see how it goes, I'm thinkin the next one I get made will have the part that the number plate fixes do a bit longer so I can get a plate light mounted abouve.

04-10-13, 11:12 AM	#2
Shawthing Member Join Date: May 2011 Location: Manchester Posts: 396	Re: Look what i had made! OK. Put us out of our missery. Where are you going to Stick it? I say stick as there do not seem to be any mounting holes. __________________ SK9 Sport Black Delkevic can. Non arbores caesa suum mittere nuntius, sed magnum numerum electrons uehementissime incommo.

04-10-13, 11:20 AM	#3
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Look what i had made! i'll take a guess and say its a tail tidy, tidy to cover the gaps

04-10-13, 03:05 PM	#4
Tommo1988 Guest Posts: n/a	Re: Look what i had made! Yea its ma tail tidy I had made up, Iv got a overlay for the mounting holes so ill see how it goes this Sunday I hope.

04-10-13, 07:32 PM	#5
Dan505 Guest Posts: n/a	Re: Look what i had made! How much for them to do all your panels like that? Be a bitch to clean but defo one trick looking ride

04-10-13, 08:02 PM	#6
wideguy Guest Posts: n/a	Re: Look what i had made! Looks like aluminum of some sort. Do you know the alloy? I'd anodize or alodise it, then coat it with epoxy primer and good quality paint, then be sure to not have any contact between steel fasteners and the aluminum part. Unless you don't want it to last very long. Actually I looked again, and it looks like stainless steel. The weld threw me off, since it looks like a weld in aluminum. Last edited by wideguy; 04-10-13 at 08:03 PM.

04-10-13, 08:11 PM	#7
Tommo1988 Guest Posts: n/a	Re: Look what i had made! Yea its stainless, the boys knocked it together as a feebe for me but I'm sure I can get others made too if anyone is interested, can also get it painted black if ya like, this is a kinda prototype atm, but like I said ill fit it on Sunday all goin well and well see how it goes, I'm thinkin the next one I get made will have the part that the number plate fixes do a bit longer so I can get a plate light mounted abouve.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Have I made it?	Luckypants	Idle Banter	12	02-09-09 04:25 PM
Has anyone made home made abba stand adapters?	monkey	Bikes - Talk & Issues	9	31-03-09 10:00 PM
Anyone made a will ?	stewie	Idle Banter	32	18-02-08 02:12 PM
saw this and it made me think!	neio79	Idle Banter	2	25-09-07 09:50 AM
made one	Richie	Idle Banter	15	04-02-06 02:44 PM