Help !! - SV650.org

10-03-05, 06:14 PM

Anyone got any screw extractors I could borrow ?

or stud extractor... dunno which i'll need

and can deliver ? or know anywhere I could get to locally without bike to buy ?

pegasus · 10-03-05, 06:44 PM

you should be able to get them from any hardware or diy shop...ask for a screw tap.. should only be a couple of quid failing that ian your best bet is to use a drill with a 3.2MM hss bit and drill straight through it eventually it will just crumble

10-03-05, 06:57 PM

yeah id go for the drill option myself,

just drill a tiny hole dead in the centre of the offending article . . and the rest should just crumble out like cheese.

best of luck anyway tho.

10-03-05, 06:58 PM

yeah i had a quick go with the drill, wasn't doing anything, will probably give it another go on sat then will have to warm bike up to get oil out

altho better to heat oil up first i would think, depending how much drips out

11-03-05, 11:20 AM

ok forget that, gonna try and find a dealer to do it, not worth the risk

15-03-05, 11:28 PM

Hi
I have not been on here for a while to busy with work. If you have not sorted your bike get in touch cos you could come round as i have all the tools you need

16-03-05, 08:01 AM

Cheers for the offer mate but i'm gonna do a temporary seal this weekend with silicone and viney is sorting out for me over easter....

thanx again

28-03-05, 05:54 PM

Hey Ian, what's the latest?

Are you sorted yet?

28-03-05, 08:09 PM

nope....

still have a leak... its rideable for short hops but as soon as it gets hot it drips...

tis bunged up with silicone sealant atm

28-03-05, 08:18 PM

Quote:

Originally Posted by Iansv

but as soon as it gets hot it drips...

.

10-03-05, 06:14 PM	#1
Iansv Guest Posts: n/a	Help !! Anyone got any screw extractors I could borrow ? or stud extractor... dunno which i'll need and can deliver ? or know anywhere I could get to locally without bike to buy ?

10-03-05, 06:44 PM	#2
pegasus Member Mega Poster Join Date: Aug 2004 Posts: 1,122	you should be able to get them from any hardware or diy shop...ask for a screw tap.. should only be a couple of quid failing that ian your best bet is to use a drill with a 3.2MM hss bit and drill straight through it eventually it will just crumble __________________ tune in, turn on, burn out

10-03-05, 06:57 PM	#3
Warren Guest Posts: n/a	yeah id go for the drill option myself, just drill a tiny hole dead in the centre of the offending article . . and the rest should just crumble out like cheese. best of luck anyway tho.

10-03-05, 06:58 PM	#4
Iansv Guest Posts: n/a	yeah i had a quick go with the drill, wasn't doing anything, will probably give it another go on sat then will have to warm bike up to get oil out altho better to heat oil up first i would think, depending how much drips out

11-03-05, 11:20 AM	#5
Iansv Guest Posts: n/a	ok forget that, gonna try and find a dealer to do it, not worth the risk

15-03-05, 11:28 PM	#6
checa Guest Posts: n/a	Hi I have not been on here for a while to busy with work. If you have not sorted your bike get in touch cos you could come round as i have all the tools you need

16-03-05, 08:01 AM	#7
Iansv Guest Posts: n/a	Cheers for the offer mate but i'm gonna do a temporary seal this weekend with silicone and viney is sorting out for me over easter.... thanx again

28-03-05, 05:54 PM	#8
RobSV Guest Posts: n/a	Hey Ian, what's the latest? Are you sorted yet?

28-03-05, 08:09 PM	#9
Iansv Guest Posts: n/a	nope.... still have a leak... its rideable for short hops but as soon as it gets hot it drips... tis bunged up with silicone sealant atm