High Level Conversion

I have ordered a high level exhaust conversion pipe from BanditMania, which will obviously mean that I lose the rear footpegs. The question is, would one need a special hanger to go in place of this?

Has anyone else tried/done this?

Cheers,

Haven't tried the one from Bandit Mania, but have a hi level Bluefalme. Footrest still there, it came with brackets and all. Somone at Bandut mania should be able to tell you else someone on ere will come along soon

Originally Posted by bobit69

Has anyone else tried/done this?

Cheers,

PM richie1743

[Richie]

Asked by Bobit69 about my High level pillion mod I did,
So here are the photo's and how 2's... easy really.

Made up 2 x Spacers 1) 75mm Long X 26mm Outside Dia, with a 8mm Drilled hole through the middle
and 2) 70mm Long (for the exhaust bracket to fit behind) X 26mm Outside Dia, with a 8mm Drilled hole.
Material used is Aluminium Bar 26mm.


The exhaust bracket is a piece of Aluminium tube for a kid's cloths rail crushed at both ends with a 8mm hole drilled in and shaped (rounded off)
Think I might secure the exhaust bracket behind the peg bracket and bolt it in possition, might make it look better.


Just showing the amount of distance between footpeg and exhaust..


Hope this helps...
Richie