Jack up tail peice - SV650.org

TSM · 09-11-05, 01:22 PM

Any one ever jacked up the tail peice on the SV. I am looking at a easy way to do it. Only a couple of cm. I am already looking at jacking up the ride height.

09-11-05, 01:25 PM

Grinch may be able to help! I am sure a friend of his has done this????! Not 100% sure though.

Viney · 09-11-05, 01:41 PM

As in have the tail pointing upwards in a streetfighter styleee? If so, then you need to modify the seat unit plastics, subframe and seat!!

TSM · 09-11-05, 01:44 PM

Quote:

Originally Posted by Viney

As in have the tail pointing upwards in a streetfighter styleee? If so, then you need to modify the seat unit plastics, subframe and seat!!

I checked, it seems like you can get away with several cm of jack up without any problem. I dont want it skywards, just a tad up. Its unlikley that i will use the side fill in plastics.

09-11-05, 02:04 PM

A mate of mine had just added a little plate between the sub frame and the mounts.. jacks the end up a tad.. but you do loose the black underseat plastics. He's had load of crashed and bashes and its never broken.

09-11-05, 01:22 PM	#1
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Jack up tail peice Any one ever jacked up the tail peice on the SV. I am looking at a easy way to do it. Only a couple of cm. I am already looking at jacking up the ride height. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me out with 2/1? peice?	sauluk	Suits	18	20-03-09 02:48 PM
Curvy tail skirt or tail tidy	mouldy	Stuff Wanted	3	21-02-09 12:49 PM
one peice ALPINESTARS	thinone	Idle Banter	2	07-11-08 09:49 AM
Removing plastice peice that holds plate	PWNDLOL	SV Talk, Tuning & Tweaking	6	17-05-06 08:58 PM
jack up kit help!!!	adey	SV Talk, Tuning & Tweaking	5	05-01-06 03:59 PM

09-11-05, 01:25 PM	#2
Scoobs Guest Posts: n/a	Grinch may be able to help! I am sure a friend of his has done this????! Not 100% sure though.

09-11-05, 01:41 PM	#3
Viney Member Mega Poster Join Date: Jul 2003 Location: In the shadows to the left Posts: 7,700	As in have the tail pointing upwards in a streetfighter styleee? If so, then you need to modify the seat unit plastics, subframe and seat!!

09-11-05, 02:04 PM	#5
Grinch Guest Posts: n/a	A mate of mine had just added a little plate between the sub frame and the mounts.. jacks the end up a tad.. but you do loose the black underseat plastics. He's had load of crashed and bashes and its never broken.