New LED Clear lights, Indies & Mirror indies... - SV650.org

23-12-05, 10:18 PM

Hello folks

Said a wee while back (on SVECOSSE) that I would post some pics of the new lights/indicators/mirrors that I was fitting.

Managed to finish them last week.

Top tip...
when testing the lights etc, dont leave the ignition on for too long !!!

wee mistake = battery flat as a witches t*ts = optimate 3 = 45 quid !

Anyway, what do you think ?

scooby
http://server3.uploadit.org/files/scooby2102-1.jpg
http://server2.uploadit.org/files/scooby2102-2.jpg
http://server2.uploadit.org/files/scooby2102-3.jpg
http://server2.uploadit.org/files/scooby2102-4.jpg
http://server3.uploadit.org/files/scooby2102-5.jpg
http://server2.uploadit.org/files/scooby2102-6.jpg
http://server2.uploadit.org/files/scooby2102-7.jpg
http://server2.uploadit.org/files/scooby2102-8.jpg

23-12-05, 11:09 PM

Nice, but you've still got a standard can

23-12-05, 11:12 PM

That looks realy cool!!, how much it cost you for the lot?

24-12-05, 01:25 AM

Cloggsy, yep, thats the next project, have checked out loads of different makes but like the Blue Flame Evo3 job or one by the Carbon Can Co.

Lookin at the possibility of making it a twin pipe jobby like the SV1000

Didge - the LED indicators are Motrax - 30 quid a pair, the mirrors also Motrax - 30 quid each and the rear light unit 58 quid from Clear Alternatives via eBay (comes with 2 resistors needed to slow the blink rate down)

24-12-05, 09:58 AM

Quote:

Originally Posted by scooby2102

Cloggsy, yep, thats the next project, have checked out loads of different makes but like the Blue Flame Evo3 job or one by the Carbon Can Co.

Don't buy 'Blue Flame'

Read this before you do...

24-12-05, 10:26 AM

Interesting combination with the mirror indicators and normal indicators. Though the mirrors do look quite good on it, did you consider just the mirror indicators only on it without the pointy indicators?

25-12-05, 09:28 AM

I really like what u did with the rear but not keen on the mirror indies. Maybe u should have got short stem leds for the front....thats what i am doing this week

25-12-05, 10:39 PM

Falc - TC3

Yep, thought of removing the front indicators then also thought of just fitting the shorter stem ones but in the end, just done it as is.

Probably will get fed up with them or change them when some different bling comes out

26-12-05, 12:12 AM

Quote:

Originally Posted by TC3

I really like what u did with the rear but not keen on the mirror indies. Maybe u should have got short stem leds for the front....thats what i am doing this week

IMO, any additional lighting (signals or otherwise) is going to help somebody either see you, or see that you are turning. Having indicators in the mirrors raises the level of the signal to one which is more in line with the vision of oncoming drivers.

Personally, I think it looks ace.. Well done, good job.

.

26-12-05, 07:43 PM

Looks very good, got one of them clear rear lights on mine think they look excellent, spent ages looking for different mirrors do like the ones you have put on, what is the rear view like on them??

23-12-05, 10:18 PM	#1
scooby2102 Guest Posts: n/a	New LED Clear lights, Indies & Mirror indies... Hello folks Said a wee while back (on SVECOSSE) that I would post some pics of the new lights/indicators/mirrors that I was fitting. Managed to finish them last week. Top tip... when testing the lights etc, dont leave the ignition on for too long !!! wee mistake = battery flat as a witches t*ts = optimate 3 = 45 quid ! Anyway, what do you think ? scooby http://server3.uploadit.org/files/scooby2102-1.jpg http://server2.uploadit.org/files/scooby2102-2.jpg http://server2.uploadit.org/files/scooby2102-3.jpg http://server2.uploadit.org/files/scooby2102-4.jpg http://server3.uploadit.org/files/scooby2102-5.jpg http://server2.uploadit.org/files/scooby2102-6.jpg http://server2.uploadit.org/files/scooby2102-7.jpg http://server2.uploadit.org/files/scooby2102-8.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Show us your indies	James SV	SV Talk, Tuning & Tweaking	4	14-04-09 06:41 PM
Original Indies	Neeja	For Sale - SV's and SV related items	4	10-07-08 12:56 PM
Aftermarket indies	Blue_SV650S	SV Talk, Tuning & Tweaking	17	08-08-07 06:40 PM
Mini indies on front.... how?	toonyank	SV Talk, Tuning & Tweaking	7	15-07-07 07:38 PM
Mini indies anyone?	toonyank	Stuff Wanted	7	11-07-07 05:19 PM

23-12-05, 11:09 PM	#2
Cloggsy Guest Posts: n/a	Nice, but you've still got a standard can

23-12-05, 11:12 PM	#3
didge Guest Posts: n/a	That looks realy cool!!, how much it cost you for the lot?

24-12-05, 01:25 AM	#4
scooby2102 Guest Posts: n/a	Cloggsy, yep, thats the next project, have checked out loads of different makes but like the Blue Flame Evo3 job or one by the Carbon Can Co. Lookin at the possibility of making it a twin pipe jobby like the SV1000 Didge - the LED indicators are Motrax - 30 quid a pair, the mirrors also Motrax - 30 quid each and the rear light unit 58 quid from Clear Alternatives via eBay (comes with 2 resistors needed to slow the blink rate down)

24-12-05, 10:26 AM	#6
falc Guest Posts: n/a	Interesting combination with the mirror indicators and normal indicators. Though the mirrors do look quite good on it, did you consider just the mirror indicators only on it without the pointy indicators?

25-12-05, 09:28 AM	#7
TC3 Guest Posts: n/a	I really like what u did with the rear but not keen on the mirror indies. Maybe u should have got short stem leds for the front....thats what i am doing this week

25-12-05, 10:39 PM	#8
scooby2102 Guest Posts: n/a	Falc - TC3 Yep, thought of removing the front indicators then also thought of just fitting the shorter stem ones but in the end, just done it as is. Probably will get fed up with them or change them when some different bling comes out

26-12-05, 07:43 PM	#10
manxsv Guest Posts: n/a	Looks very good, got one of them clear rear lights on mine think they look excellent, spent ages looking for different mirrors do like the ones you have put on, what is the rear view like on them??