Pipe diameter - SV650.org

BoltonSte · 31-01-06, 11:30 PM

Can someone please measure the OD of their stock pipes?
The sexy curvey years? I want to check on the bit behind the weld once it goes into the single pipe, where you would cut to put a slip on......on, so I can work out the id of a link pipe.

cheers

ste

timwilky · 31-01-06, 11:41 PM

Just miced mine for you. must be mad going out to the garage at this time of night

54.26 mm, might be a bit of deformation from when I cut my pipe though. Recon you should be ok with 55-56mm id with a bit of silicon seal as recommended to me by Carbon Can

BoltonSte · 01-02-06, 12:40 AM

Fantastic.......bit late for you innit?
Just have to ait till the second to see if it fit's

31-01-06, 11:30 PM	#1
BoltonSte Member Mega Poster Join Date: Aug 2003 Location: Back in Bolton Posts: 1,010	Pipe diameter Can someone please measure the OD of their stock pipes? The sexy curvey years? I want to check on the bit behind the weld once it goes into the single pipe, where you would cut to put a slip on......on, so I can work out the id of a link pipe. cheers ste __________________ Had an SV or three. Street triple R - gone but not forgotten. Now trying the lunacy that is KTM with a Superduke GT. for the pillion capability of course.

31-01-06, 11:41 PM	#2
timwilky Member Mega Poster Join Date: Mar 2004 Location: Not in Yorkshire. (Thank God) Posts: 4,116	Just miced mine for you. must be mad going out to the garage at this time of night 54.26 mm, might be a bit of deformation from when I cut my pipe though. Recon you should be ok with 55-56mm id with a bit of silicon seal as recommended to me by Carbon Can __________________ Not Grumpy, opinionated.

01-02-06, 12:40 AM	#3
BoltonSte Member Mega Poster Join Date: Aug 2003 Location: Back in Bolton Posts: 1,010	Fantastic.......bit late for you innit? Just have to ait till the second to see if it fit's __________________ Had an SV or three. Street triple R - gone but not forgotten. Now trying the lunacy that is KTM with a Superduke GT. for the pillion capability of course.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Link Pipe Diameter	Sideshow#36	SV Talk, Tuning & Tweaking	1	01-09-08 08:49 PM
Exhaust pipe diameter	rs_tubby	SV Talk, Tuning & Tweaking	2	18-06-07 02:15 PM
Link Pipe diameter	Rockin' Rob	SV Talk, Tuning & Tweaking	2	25-05-06 12:37 PM
link pipe diameter?	Rockin' Rob	Exhausts	0	23-05-06 03:17 PM
Exhaust pipe diameter	Mags	SV Talk, Tuning & Tweaking	3	22-12-05 04:37 PM