Rotor puller tool (cost) - SV650.org

26-02-06, 11:43 AM

About to do the offset timing key mod, just wondering if anybody knows how much the official suzuki rotor puller costs, I believe the tool is basically a 20mm bolt with a 1.5mm pitch thread. I was just going to source a bolt from an engineering shop but if the official tools cheap I,ll buy that for easyness.

26-02-06, 12:09 PM

I have a feeling it's approx £25 which is totally outrageous as it's just a bolt.

(thankfully Northend was kind enough to lend me his when Sid Squid and I did mine)

Don't expect much in the way of more top end power but the much fatter torque curve is great.

.

northwind · 26-02-06, 02:47 PM

If I can find mine, you're welcome to borrow it. I think I paid £25, just could not be bothered chasing down the bolt to be totally honest. Weak, I know

26-02-06, 05:37 PM

yea arround 25quid.

I've got one if northy cant find his...you can borrow it for the cost of a return stamp to london.

Dan

26-02-06, 07:14 PM

Cheers lads, I'll see if I can get hold of a bolt from the enineering shop first, if I can't I'll get in touch.

26-02-06, 08:21 PM

Anyone have a picture of it ( is it just a threaded M20 X 1.5mm bolt ). ????????

26-02-06, 08:33 PM

Quote:

Originally Posted by mac

Anyone have a picture of it ( is it just a threaded M20 X 1.5mm bolt ). ????????

Not sure what it is, not got any vernia calipers or thead pitch guages to hand. But yes. It is just a bolt. Mind you it is powder coated black.... so thats where that 23.99 went then...

Dan

northwind · 26-02-06, 08:43 PM

Basically... Don't quote me on the size, though!

26-02-06, 09:59 PM

I believe it's high tensile, which is a bit harder to track down as a pattern part.

However - suggestion.....

As I too would be doing this mod at some point, how about we get one between us? Is that three folk so far? Possibly more. £10 each isn't so bad. The gasket is a whopping fiver and woodruff key erm, £15 or something.

Maybe even sell it on ebay at the end and we're quids in. It's not likely you'll need it again.

26-02-06, 10:02 PM

Quote:

Originally Posted by haggis

However - suggestion.....

As I too would be doing this mod at some point, how about we get one between us? Is that three folk so far? Possibly more. £10 each isn't so bad. The gasket is a whopping fiver and woodruff key erm, £15 or something.

Maybe even sell it on ebay at the end and we're quids in. It's not likely you'll need it again.

Um...isn't that what northwind and myself just offered?

26-02-06, 11:43 AM	#1
kashby Guest Posts: n/a	Rotor puller tool (cost) About to do the offset timing key mod, just wondering if anybody knows how much the official suzuki rotor puller costs, I believe the tool is basically a 20mm bolt with a 1.5mm pitch thread. I was just going to source a bolt from an engineering shop but if the official tools cheap I,ll buy that for easyness.

26-02-06, 02:47 PM	#3
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	If I can find mine, you're welcome to borrow it. I think I paid £25, just could not be bothered chasing down the bolt to be totally honest. Weak, I know __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

26-02-06, 08:43 PM	#8
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Basically... Don't quote me on the size, though! __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ignition advancer rotor puller	svryanpompy	For Sale - SV's and SV related items	0	05-05-07 10:06 AM
rotor puller	svryanpompy	Stuff Wanted	17	17-03-07 07:48 AM
I need a rotor puller tool	svrash	SV Talk, Tuning & Tweaking	8	22-03-06 03:58 PM
Who's got my rotor puller?	northwind	SV Talk, Tuning & Tweaking	4	03-01-06 03:58 PM
Rotor Puller Tool	TSM	SV Talk, Tuning & Tweaking	6	07-12-05 06:24 PM

26-02-06, 12:09 PM	#2
jonboy Guest Posts: n/a	I have a feeling it's approx £25 which is totally outrageous as it's just a bolt. (thankfully Northend was kind enough to lend me his when Sid Squid and I did mine) Don't expect much in the way of more top end power but the much fatter torque curve is great. .

26-02-06, 05:37 PM	#4
Sudoxe Guest Posts: n/a	yea arround 25quid. I've got one if northy cant find his...you can borrow it for the cost of a return stamp to london. Dan

26-02-06, 07:14 PM	#5
kashby Guest Posts: n/a	Cheers lads, I'll see if I can get hold of a bolt from the enineering shop first, if I can't I'll get in touch.

26-02-06, 08:21 PM	#6
mac Guest Posts: n/a	Anyone have a picture of it ( is it just a threaded M20 X 1.5mm bolt ). ????????

26-02-06, 09:59 PM	#9
haggis Guest Posts: n/a	I believe it's high tensile, which is a bit harder to track down as a pattern part. However - suggestion..... As I too would be doing this mod at some point, how about we get one between us? Is that three folk so far? Possibly more. £10 each isn't so bad. The gasket is a whopping fiver and woodruff key erm, £15 or something. Maybe even sell it on ebay at the end and we're quids in. It's not likely you'll need it again.