Turning an 04 sv650 into 04 sv650s - SV650.org

25-08-06, 02:24 AM

Hello. I just got an sv650 and Im looking to turn it into an sv650s. My friend said that you guys would know what to do. I do live in america though

. So if anyone knows how to do this and help would be great. Thanks

25-08-06, 01:14 PM

Get some clip on handlebars, or just the fornt end from an sv650s.

Buy a fairing set off ebay. Change the rear sprocket one size up and your done. (I think) :P

TSM · 25-08-06, 01:24 PM

also rewire the loom for the headlights, front subframe = gets expensive. Sell bike and get a faired one already.

jambo · 25-08-06, 02:14 PM

For the full "S" experiance you will need:
Rear sprocket 1 tooth less than current
Both left & Right foot peg assembelys
Clip ons
Top Yoke (For clip ons)
Fairing sub frame
Fairing including headlight, mirrors etc.
Any wiring loom *editing* needed

It really isn't worth it, either sell your bike and buy an "S" or just get an after market screen of some sort

25-08-06, 04:36 PM

Quote:

Originally Posted by jambo

For the full "S" experiance you will need:
Rear sprocket 1 tooth less than current

That's the one!

I tried reversing it the other day (and I'm not talking about going backwards

). Not too hard to take it apart and mount a headlight, but then you need to make a bracket for the speedo and it just becomes unnecessary hassle.

As said before, take it back and get an S version. You won't regret it. Unless of course you've become accustomed to the nice high bars.

25-08-06, 05:26 PM

Quote:

Originally Posted by jambo

For the full "S" experiance you will need:
Rear sprocket 1 tooth less than current
Both left & Right foot peg assembelys
Clip ons
Top Yoke (For clip ons)
Fairing sub frame
Fairing including headlight, mirrors etc.
Any wiring loom *editing* needed

It really isn't worth it, either sell your bike and buy an "S" or just get an after market screen of some sort

Manily Im just looking to change the front of the bike so, ill need, clip ons, top yoke fairings, wiring correct?

25-08-06, 05:30 PM

A wiring loom can be picked up for $20 on ebay and I'm sure you could find a spare front fairing rolling around somewhere on there too. Subframe is the only other real thing you need, besides the stuff you've mentioned.

Good luck with it, if you wanted to try and be really clever you could just find a way to fab some mounting points on your frame and fiddle around with your existing subframe.

Hope it goes well and doesn't end in tears.

25-08-06, 05:40 PM

I can get these parts at a local dealership, or should I try and get them else where. The main reason I need to re do the front end is because I saw a fairing kit for the bike and need to change the front headlight ect.

25-08-06, 02:24 AM	#1
virus Guest Posts: n/a	Turning an 04 sv650 into 04 sv650s Hello. I just got an sv650 and Im looking to turn it into an sv650s. My friend said that you guys would know what to do. I do live in america though . So if anyone knows how to do this and help would be great. Thanks

25-08-06, 01:24 PM	#3
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	also rewire the loom for the headlights, front subframe = gets expensive. Sell bike and get a faired one already. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

25-08-06, 02:14 PM	#4
jambo Member Mega Poster Join Date: Aug 2003 Location: Croydonia Posts: 5,376	For the full "S" experiance you will need: Rear sprocket 1 tooth less than current Both left & Right foot peg assembelys Clip ons Top Yoke (For clip ons) Fairing sub frame Fairing including headlight, mirrors etc. Any wiring loom editing needed It really isn't worth it, either sell your bike and buy an "S" or just get an after market screen of some sort __________________ Modern motorcycles are bloody brilliant, enjoy it while we can

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SV650 turning over but not kicking in	Ben_K	SV Talk, Tuning & Tweaking	12	18-09-08 10:27 PM
my sv650 keeps turning sv325 please help	maclovin	Bikes - Talk & Issues	2	24-07-08 11:00 PM
my sv650 keeps turning sv325 please help	maclovin	Bikes - Talk & Issues	9	24-07-08 08:05 PM
G-PACK for SV650 SV650S SV 650 SV650 S - EFI MODELS - Timing Retard Eliminator	ThEGr33k	SV Talk, Tuning & Tweaking	0	25-11-07 12:22 AM
SV650 vs. SV650S - How Different??	mastiffmat	SV Talk, Tuning & Tweaking	6	29-06-06 06:04 PM

25-08-06, 01:14 PM	#2
Davido Guest Posts: n/a	Get some clip on handlebars, or just the fornt end from an sv650s. Buy a fairing set off ebay. Change the rear sprocket one size up and your done. (I think) :P

25-08-06, 05:30 PM	#7
Davido Guest Posts: n/a	A wiring loom can be picked up for $20 on ebay and I'm sure you could find a spare front fairing rolling around somewhere on there too. Subframe is the only other real thing you need, besides the stuff you've mentioned. Good luck with it, if you wanted to try and be really clever you could just find a way to fab some mounting points on your frame and fiddle around with your existing subframe. Hope it goes well and doesn't end in tears.

25-08-06, 05:40 PM	#8
virus Guest Posts: n/a	I can get these parts at a local dealership, or should I try and get them else where. The main reason I need to re do the front end is because I saw a fairing kit for the bike and need to change the front headlight ect.