Powercommanders - are they interchangable? - SV650.org

12-01-07, 02:06 PM

Just doing some research for a mate, and wondered if powercommanders were interchangable? Looked on their website and models appear to have different part numbers, but wondered if this was anything to do with wiring configuration and whether you could "adapt" a powercommander to fit any bike?

It would follow logic that powercommander only produce 1 unit which can be programmed with different maps, but wondered if that was how it worked? My bike being a carbed model, I wouldn't really have a clue.

Help much appreciated.

Jase

BoltonSte · 12-01-07, 03:06 PM

Doubt it, the internals may be the same but iirc they connect to the ECU and the injectors so that part of the wiring at least would probably be different at least between manufacturers.

Not much help I know, if you know someone who's got one I can compare it with the TL PCIII I have in my garage at the mo.

Ste

13-01-07, 03:41 PM

No they arent interchangable am afraid.

13-01-07, 04:58 PM

Just on this - anyone recommend the best place to get one? Online and or shop??

13-01-07, 05:06 PM

Some are interchangeable, depends on the connectors. For example many gsxr 600/750 and 1000 ones are. Not sure about SV connectors though. Dynojet have been to me in the past via email - try emailing them. www.dynojet.co.uk will have their address.

12-01-07, 02:06 PM	#1
Jase22 Guest Posts: n/a	Powercommanders - are they interchangable? Just doing some research for a mate, and wondered if powercommanders were interchangable? Looked on their website and models appear to have different part numbers, but wondered if this was anything to do with wiring configuration and whether you could "adapt" a powercommander to fit any bike? It would follow logic that powercommander only produce 1 unit which can be programmed with different maps, but wondered if that was how it worked? My bike being a carbed model, I wouldn't really have a clue. Help much appreciated. Jase

12-01-07, 03:06 PM	#2
BoltonSte Member Mega Poster Join Date: Aug 2003 Location: Back in Bolton Posts: 1,010	Doubt it, the internals may be the same but iirc they connect to the ECU and the injectors so that part of the wiring at least would probably be different at least between manufacturers. Not much help I know, if you know someone who's got one I can compare it with the TL PCIII I have in my garage at the mo. Ste __________________ Had an SV or three. Street triple R - gone but not forgotten. Now trying the lunacy that is KTM with a Superduke GT. for the pillion capability of course.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SRAD and ZX6R shocks interchangable?	mysteryjimbo	Bikes - Talk & Issues	8	21-06-06 12:14 PM

13-01-07, 03:41 PM	#3
SV650Racer Guest Posts: n/a	No they arent interchangable am afraid.

13-01-07, 04:58 PM	#4
Demonz Guest Posts: n/a	Just on this - anyone recommend the best place to get one? Online and or shop??

13-01-07, 05:06 PM	#5
jonboy99 Guest Posts: n/a	Some are interchangeable, depends on the connectors. For example many gsxr 600/750 and 1000 ones are. Not sure about SV connectors though. Dynojet have been to me in the past via email - try emailing them. www.dynojet.co.uk will have their address.