gsxr yokes for sv

doing a fork upgrade, but need to know what year and model gsxr yolks fit the sv with pretty much hassle free insertion. need to be the right diameter for usd forks mind. ta very much

rik

Throw us a bone, you'll need to give us more info than that.

oh yea, sorry. 99 model sv650, only really need the lower yoke as i will be getting an aftermarket top yoke for renthal bars. and like i said need to be for the larger diameter used forks, not the standard forks. ta

Rik

[northwind]

SRAD 750 then... Keeps the lock stops and the bottom bearing's the same. You can drill the top yoke for bar risers if you want, but a custom one would be stronger, easier to sort the clocks out too. Also cooler

The SRAD yokes are very wide though, can be a bit problematic with newer forks, and really recent GSXR forks are narrower than SRAD ones. But if you use SRAD or Y-K3 750 forks with conventional calipers it'll work a charm.

im wanting to use some r1 forks, because the look of the calipers would go well with the look of the bike. the calipers with the gold inserts would look a treat. as long as the srad yokes are 43mm in diameter then all should be good. if not i can machine either the fork legs or the yokes down very slightly. that shouldnt be a problem.

[northwind]

I think someone here's done just that with SRAD/R1 forks, but can't remember how it worked out.