SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
As some of you might know I get my first bike on Monday (allbeit restricted!).
Are there any issues with fitting an aftermarket zaust onto a restricted bike? Any issues with fueling and such like? Thanks for the help guys. |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
Fit a slip-on can and you will have no problem with either, its full systems that have these issues applicable.
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Thanks for the quick response!
I guess the rumours are true about having to cut the original can off? Does this cause any problems if I wanted to put the original back on? Sorry these questions seem abit dumb, but we are all here to learn ; ) |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
No some cans come with a sleeve (a piece of tube) which will fit over the section of pipe you have cut and clamp in place with exhaust clamps. If you don't get one with the can you can get them off ebay, i'll post a link in a mo.
Update - There isn't one on ebay by itself at the moment but you can see the sleeve in this pic next to a OEM curvy can. ![]() Last edited by Dangerous Dave; 09-04-08 at 07:11 PM. |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
How far would I know how to cut? Or would I just figure this out with the sleeve?
Any exhaust recommendations? (I understand I don't have my bike yet but just making plans for payday at the end of the month!!) |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
Getting a curvey on Monday. Well, it should be ready for this weekend but me being me got my insurance to start from Sunday/Monday night.
![]() What recomendation for type of exhaust? I've read good stuff about laser cans. My father has a pair of akra's on his R1 but akra's are a little pricey! |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
Good choice, getting an S or an N and what colour???
Fuel, CCC, Laser, Scorpion, Remus, Quill, Blueflame, etc... They are all good cans really, you'll be better off getting one of the removable baffle type cans in my opinion. Laser is a half system so no cutting required, you replace everything except the front down pipe, should get away with that on a restriction. |
![]() |
![]() |
#9 |
Evel Knievel
Mega Poster
Join Date: Jun 2007
Location: Eastleigh
Posts: 4,641
|
![]()
for price i personally would go for fuel they sound pretty sweet, there are a few makes around the same price as the fuel cans, i think beowulf are around the same price
EDIT: beaten bye the almighty dave ![]() |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
Getting an S
![]() I quite like the blueflame dual port can. On the Blueflame site it is advertised as "SV650 (cut system)". Does this mean that it would come with the sleeve or not? I really do appreciate the help! On a slight side note, last night in the pub i persuaded two of my mates to do there bike test and that's before they have even seen my bike! ![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
exhaust question. | AndyBrad | Bikes - Talk & Issues | 5 | 14-03-09 04:03 AM |
Quicky question on restriction - advice needed. | Ruthja2801 | SV Talk, Tuning & Tweaking | 43 | 26-02-09 07:55 AM |
Would a new exhaust system mess up my restriction? | kd sweety | SV Talk, Tuning & Tweaking | 24 | 09-03-08 10:25 AM |
The 33bhp restriction (new question dont think its covered) | ScottishRawker | Bikes - Talk & Issues | 23 | 08-06-07 05:24 PM |
Another restriction Question | c_noble | SV Talk, Tuning & Tweaking | 11 | 03-05-06 08:17 AM |