Help required fitting a GSXR1000 K6 shock - SV650.org

08-09-07, 06:28 PM

This is a request for help from some mechanically cometent people on this site.

I now havea K6 GSXR shock ready for fiting but am no way going to attempt to do the job myself.

So i was wondering if anoyone on here would be able to offer their help/expertise to give me a hand one weekend??

obviously i would come to you.

10-09-07, 10:52 AM

I just did a shock fork upgrade, your welcome to stop over but the distance might take some time...I am in Detroit.

If you are relatively handy, the well-published instructions will guide you along.

10-09-07, 01:14 PM

Quote:

Originally Posted by pilot

I just did a shock fork upgrade, your welcome to stop over but the distance might take some time...I am in Detroit.

If you are relatively handy, the well-published instructions will guide you along.

Thanks for the offer but I think you might be a little to far away to help me properly.

Bump,

Any offers anyone??

10-09-07, 04:22 PM

its not hard if you have questions pm me well not hard if you have a tool set and a garage or something you can put a strap over a beam to lift the back end up

10-09-07, 06:42 PM

I have some tools, but no way to suspend the back end properly.

10-09-07, 07:04 PM

Axle Stands under the footpegs. It is a piece of cake mate. Litterally 8 Bolts. Whip em out clean em up. A dab of Copper grease and slide in the new shock. Put the bolts back in and torque up. Did my rear elka shock in about half an hour.

08-09-07, 06:28 PM	#1
neio79 Guest Posts: n/a	Help required fitting a GSXR1000 K6 shock This is a request for help from some mechanically cometent people on this site. I now havea K6 GSXR shock ready for fiting but am no way going to attempt to do the job myself. So i was wondering if anoyone on here would be able to offer their help/expertise to give me a hand one weekend?? obviously i would come to you. Last edited by neio79; 08-09-07 at 07:00 PM.

10-09-07, 10:52 AM	#2
pilot Guest Posts: n/a	Re: Help required fitting a GSXR1000 K6 shock I just did a shock fork upgrade, your welcome to stop over but the distance might take some time...I am in Detroit. If you are relatively handy, the well-published instructions will guide you along.

10-09-07, 04:22 PM	#4
kcowgergmm Guest Posts: n/a	Re: Help required fitting a GSXR1000 K6 shock its not hard if you have questions pm me well not hard if you have a tool set and a garage or something you can put a strap over a beam to lift the back end up

10-09-07, 06:42 PM	#5
neio79 Guest Posts: n/a	Re: Help required fitting a GSXR1000 K6 shock I have some tools, but no way to suspend the back end properly.

10-09-07, 07:04 PM	#6
Sideshow#36 Guest Posts: n/a	Re: Help required fitting a GSXR1000 K6 shock Axle Stands under the footpegs. It is a piece of cake mate. Litterally 8 Bolts. Whip em out clean em up. A dab of Copper grease and slide in the new shock. Put the bolts back in and torque up. Did my rear elka shock in about half an hour.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitting GSXR1000 Shock to my Pointy	xXBADGERXx	SV Talk, Tuning & Tweaking	37	04-07-10 07:02 AM
SV650 K6 shock & GSXR1000 K4 Shock	weecorey	For Sale - SV's and SV related items	0	03-05-09 08:02 PM
GSXR1000 shock	tradedog	SV Talk, Tuning & Tweaking	1	09-07-06 11:07 AM
Will a GSXR1000 k3 shock fit?	jayjay	SV Talk, Tuning & Tweaking	3	07-04-06 05:35 PM
GSXR1000 Shock	chris SVK3	SV Talk, Tuning & Tweaking	20	13-01-05 06:55 PM