Airbox Removal K4 - SV650.org

20-02-06, 02:50 PM

How easy/hard is it to completely remove the airbox from a k4?

Can anyone give me a step by step guide

Cheers,

Pork Chop

20-02-06, 03:06 PM

Remove black side panel covers 2x - hex bolts
Remove seat
Raise tank (Undo two bolts, take off pillion seat, remove tank stay and put under tank)
Undo the bolts arround the top of the air box
Remove top of air box
Remove air filter
Remove pipework, and electrical connectors, and note where they go.
Under the air box on the throttle bodies are two clips, loosen them with a philips screwdriver
Lift airbox off (May take some persuasion as they are held in by rubber gromits.

Fitting is the reverse of removal.

Dan

Sid Squid · 20-02-06, 04:11 PM

Dan had lots of practice and could do this in his sleep...

21-02-06, 08:20 AM

Cheers peeps

20-02-06, 02:50 PM	#1
PoRk ChOp Guest Posts: n/a	Airbox Removal K4 How easy/hard is it to completely remove the airbox from a k4? Can anyone give me a step by step guide Cheers, Pork Chop

20-02-06, 04:11 PM	#3
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Dan had lots of practice and could do this in his sleep... __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
oil in airbox	AndyBrad	SV Talk, Tuning & Tweaking	4	18-09-08 04:53 PM
Oil in airbox	Jester666	Bikes - Talk & Issues	26	15-06-08 07:01 PM
Airbox	lawson17	SV Talk, Tuning & Tweaking	20	10-07-07 07:20 PM
Chain buffer removal requires swing arm removal :-(	2mths	SV Talk, Tuning & Tweaking	1	09-07-07 09:19 AM
K3 airbox	markmoto	SV Talk, Tuning & Tweaking	2	30-06-06 10:29 AM

20-02-06, 03:06 PM	#2
Sudoxe Guest Posts: n/a	Remove black side panel covers 2x - hex bolts Remove seat Raise tank (Undo two bolts, take off pillion seat, remove tank stay and put under tank) Undo the bolts arround the top of the air box Remove top of air box Remove air filter Remove pipework, and electrical connectors, and note where they go. Under the air box on the throttle bodies are two clips, loosen them with a philips screwdriver Lift airbox off (May take some persuasion as they are held in by rubber gromits. Fitting is the reverse of removal. Dan

21-02-06, 08:20 AM	#4
PoRk ChOp Guest Posts: n/a	Cheers peeps