gsxr forks service manual

has any one got this part of a haynes manual or the suzuki alternative for a 750 2001 forks and what is the best fork oil weight and air gap for a 650 conversion

[21QUEST]

I've tried a few different weights but just done mine with 7.5(Silkolene RSF). I found the 5wt (can't remember which brand) and standard valving(I lost too much external adjustability.

With 10wt which as far as I know is close to the Suzuki oil , again can't remember what brand much better but found could not get the comp where I personally wanted.

I have not ridden on the 7.5wt yet but have set the air gap at 125mm. Easier to add a little bit more oil is end of travel is too soft or bottoming out very easily.(standard springs on the GSXR750 K1-K3 incidentally are 0.8kg/mm).

My recommendation would be Silkolene RSF 7.5wt see. Two separate brands of fork oil with same 'wt' can have different actual viscosity so what ever brand you go for , stick with that for making any changes in oil weight.

Hope that helps.

Cheers
Ben

ps: I'll email the files to you as well.

EDIT: need your email address