curvy import wrong headlights

hello,

can anyone help I have a k2 curvy import which has euro headlights that point the wrong way.
the lights are the set up witha projector beem with one on for dipped the other for main beam. i have a uk headlight unit bought a uk sub loom but there are too many wires. my local dealers are stumped at the mo.

anyone know how to get the new light unit on my bike so i can get it through the MOT and get back to riding?

very grateful for any help

[Lissa]

Originally Posted by frosty02

hello,

can anyone help I have a k2 curvy import which has euro headlights that point the wrong way.
the lights are the set up witha projector beem with one on for dipped the other for main beam. i have a uk headlight unit bought a uk sub loom but there are too many wires. my local dealers are stumped at the mo.

anyone know how to get the new light unit on my bike so i can get it through the MOT and get back to riding?

very grateful for any help

We had an 01 import that got through 3 MOT's with those lights.............and it must surely have got through with them before if it's an 02?

[21QUEST]

Originally Posted by frosty02

hello,

can anyone help I have a k2 curvy import which has euro headlights that point the wrong way.
the lights are the set up witha projector beem with one on for dipped the other for main beam. i have a uk headlight unit bought a uk sub loom but there are too many wires. my local dealers are stumped at the mo.

anyone know how to get the new light unit on my bike so i can get it through the MOT and get back to riding?

very grateful for any help

I believe your problem is more than likely the sub-loom.

The sub-loom for the SVS K2 is different from the X,Y AND K1 . For some reason Suzuki decided it'll e a good idea to stick a different sub-loom onto the K2.

I've got one to sell if that is the problem......


Ben

bike has failed MOT on headlights.

ben

which sub loom have you got? I got the uk one which does not seem to fit as there are different amount of wires

sorry been on nights bot long up. will the x y and K1 sub loom fit stright to the euro K2?

[21QUEST]

Originally Posted by frosty02

bike has failed MOT on headlights.

ben

which sub loom have you got? I got the uk one which does not seem to fit as there are different amount of wires

Frosty, I'll try and be a bit clearer.....should also answer other post.

Basically The X,Y, and K1 use the same sub-loom and the K2 uses a completely different sub-loom.

Most breakers etc probably wouldn't know that so will just send a sub-loom for a Curvy thinking they are all the same.

I do know that a UK sub-loom off X,Y and K1 will fit into an Euro X,Y, and K1.

Working on the fact that Suzuki did change the sub-loom on the UK K2, it's reasonable to ahem assume they did change the subloom of the Euro K2 as well.

We could they conclude that since the Euro and UK sub-looms of X,Y, and K1 plug straight in, the same would apply to the UK and Euro K2s.

Haha after all that I guess I could have just said the the X,Y, K1 sub-looms won't plug straight for quick reply to your last question


Ben

Ah I see. simple really if the subloom i have is for X Y or K1 then they chagned the euro K2 and I need to ge a K2 Loom. if the sub loom is a K2 sub Loom then they didn't change the euro K2 and I need to get a X Y or K1 sub loom and then can get sorted.

many thnkas for your help

[21QUEST]

Originally Posted by frosty02

Ah I see. simple really if the subloom i have is for X Y or K1 then they chagned the euro K2 and I need to ge a K2 Loom. if the sub loom is a K2 sub Loom then they didn't change the euro K2 and I need to get a X Y or K1 sub loom and then can get sorted.

......no probs


Ben

[yorkie_chris]

Why not just look at the wiring diagram and hard wire it instead of faffing about with sub looms and such?