SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
my bike has become harder to push around over the past few days and i think one of the brakes is stuck on a little but still perfectly ridable. Is this a simple problem to fix ?
![]() |
![]() |
![]() |
#2 |
Evel Knievel
Mega Poster
Join Date: Jun 2007
Location: Eastleigh
Posts: 4,641
|
![]()
mine aswell, I think the callipers are all gunked up and need a clean thats why they're not releasing making it harder to push, but only one of mine is doing it
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Sounds like you have a caliper binding. Do a search with that as the title and I'm sure you'll find stuff. As far as I know it's pretty much a case of stripping and lubing the pistons, but do a search first as I'm not 100%.
|
![]() |
![]() |
#4 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
you might be able to get away with just giving them a clean, take the calipers off pump the pistons out a little bit and clean them with some brake cleaner then smear some red rubber grease round the pistons and push them back in
If your not lucky you may need to replace the seals
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
If it's a curvy I'd check out the rear caliper first. Just detach and support it, then try pushing the bike.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stuck in an Elevator | Warthog | Idle Banter | 9 | 21-04-08 11:19 PM |
stuck in gear | thinman | SV Talk, Tuning & Tweaking | 4 | 25-03-08 02:03 PM |
Bolts on Reg/Rec stuck | Colby | SV Talk, Tuning & Tweaking | 13 | 04-02-08 04:42 PM |
something stuck? | Stingo | Idle Banter | 2 | 30-05-06 04:32 PM |