 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
12-05-08, 11:12 AM
|
#1 |
|
Guest
Posts: n/a
|
TRE Mod Problem
Hi, I have a SV650s K6 (2006) which I fitted a TRE mod to, after fitting the bike starts fine but the red warning light stays on where the temp is displayed it alternates between temp and FI. I have followed the instructions on how to make, using 15ohm resistor and fitting between the pink and black wires after removing from the plug, I left only the blue wire in and then reconnected the plug. I was using a 15 ohm 3w resistor (is this OK?). Has anyone else seen this if so how I can I fix.
Dave |
|
|
12-05-08, 11:40 AM
|
#2 |
|
Guest
Posts: n/a
|
Re: TRE Mod Problem
Hi
dont know if this is anything to do with your problem but you say you fitted a 15 ohm resistor, well I fitted a 15kohm resistor as in diy tre instructions and have had no problems, it maybe that you need the 15k and not the 15 ohm resistor, ps 3 watt should be ok mine is 2.5 watt rated. |
|
|
|
12-05-08, 11:45 AM
|
#3 |
|
Guest
Posts: n/a
|
Re: TRE Mod Problem
Sorry Stand corrected it is a 15k
|
|
|
|
12-05-08, 12:10 PM
|
#4 |
|
Guest
Posts: n/a
|
Re: TRE Mod Problem
Think it might be to do with 15ohm as opposed to 15k, have now got right resistor will fit tonight and report back.
Dave |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Changing tyres. Pre problem, problem. | ooger | Bikes - Talk & Issues | 16 | 12-03-09 04:20 PM |
| There seems to be a problem... | gettin2dizzy | Idle Banter | 10 | 28-04-08 10:51 PM |
| i have a problem... | maff | Bodywork | 15 | 29-05-07 07:22 PM |
| I need your help with this problem! | 1-3-2-4 | SV Talk, Tuning & Tweaking | 6 | 25-09-06 01:45 PM |
| Battery problem / Alternator problem? | localhost | SV Talk, Tuning & Tweaking | 4 | 07-07-06 09:32 AM |
