![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi, im desperately looking for a front caliper bracket for my 2000 model sv650, the one i have at the moment is slightly bent and i need to pass my m.o.t. Been hunting ebay and can only seem to find rear brake caliper brackets...bit of a noob with motorbikes so dont really no where to look for one.
any help would be much appreciated! Thanks Nick |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
Bit confused Nick. The caliper mounts straight onto the forks unless you mean this?
![]() Welcome to the site too. ![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
basically i dont really no much about bikes....i rode over a hole in the ground a while back and ever since then the front brakes were making a scraping sound. When i took it into the shop to get some work done they told me that they had noticed that the front caliper bracket was slightly bent and causing the caliper to rub on the disk and cause uneven wear and that i would need to find a new caliper bracket...i have just spoken to a parts shop tho and they said that i would be unlikely to find a caliper bracket by itself and that they sell a second hand front caliper set for £69.00.
is this a reasonable price?? Seems ok to me as suzuki told me that a new front caliper set costs around £700!! |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
If it is that bracket, then it would appear from the parts pic that it isn't available seperately, hence the huge price. I would have thought someone on here will have a spare bracket from a replaced caliper. Worth holding on for as I'm sure it'll be cheaper than the 69 quid, although that price for a complete working caliper is, IMO, reasonable. Good luck
|
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
![]()
I may have one. I'll have a look in my shed tonight. Not promissing anything though!
|
![]() |
![]() |
![]() |
#6 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
erm what side do you need?
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
umm i think the right hand side....
|
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#9 |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
![]() |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
I have a pair of calipers available with newish HH pads, make me an offer if you're interested.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
advice needed RE caliper leak. | arcdef | SV Talk, Tuning & Tweaking | 11 | 31-01-09 04:56 PM |
Rear curvey 2001 caliper needed | jumjum_0214 | Stuff Wanted | 3 | 15-03-08 07:38 PM |
Front peg bracket | ljharmitt | Stuff Wanted | 11 | 20-02-08 02:10 PM |
Left Hand Gear Hange Bracket Needed | sv182 | Stuff Wanted | 2 | 10-09-06 04:25 PM |
Left Hand Gear Hange Bracket Needed | skadamo | SV Talk, Tuning & Tweaking | 2 | 08-01-70 12:15 PM |