SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
ive got an mot in two hours time.
ive rebuilt the brake calipers and now its time to fill the system up with new brake fluid but for some reason the fluid isnt pulling through? ive bought one of the one man easy bleed but when i pump the lever and then undo the nipple nothing comes out not even air noise. i am retightening the nipple before releasing the lever. is there somehting im doing wrong? |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2003
Location: South London
Posts: 9,799
|
![]()
Clearly there must be, have you done brakes before ?
obvious first, you have removed the black rubber seal from the res ? and filled beneath it with fluid ? the brake hose is firmly attached to the master cylinder at the top ? losen the caliper banjo bolt and with a rag below it try pumping some fluid threw, it comes out the banjo, yes ? try the other side as well? do them both up, and remove the bleed nipple. try again, fluid still coming out ? this should get fluid threw most of the system and ready to bleed the air of. refit the nipples and bleed as normal. HTH. Cheers Mark.
__________________
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride! |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Oct 2008
Location: West Lothian
Posts: 41
|
![]()
You could try sucking from the caliper end to get it going. Probably best with a syringe but i guess you don't have much time
__________________
Naked K3. Mods: Little thermometer thing stuck on with a bit o' velcro |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
??? and whats the outcome?
if Rictus couldnt help ya no one could- brakes are a SOD !.. and even though I think Iam quite adept- I wouldnt do them onthe day of my MOT. enlighten us?. or was it something so daft u ashamed and hid yer stupid heed>>> ? ![]() ![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
there is more than one bleed valve on the front as well isnt there??
|
![]() |
![]() |
#7 |
Member
Mega Poster
Join Date: Jul 2003
Location: South London
Posts: 9,799
|
![]()
He's either kicking himself for an obvious mistake or panicing by now................
![]()
__________________
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride! |
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
I got my friend whos a bike mechanic to pop round, he used a special vacum pump thing to get it going, its perfect now front and back.
![]() The bike passed the MOT so im happy ![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brake bleeding-where am I going wrong? | rowdy | SV Talk, Tuning & Tweaking | 20 | 02-02-09 10:36 PM |
Brake bleeding kit? | gstrong82183 | SV Talk, Tuning & Tweaking | 38 | 28-03-08 10:07 PM |
Rear Brake bleeding. What am I doing wrong? | petevtwin650 | SV Talk, Tuning & Tweaking | 8 | 08-04-07 06:30 AM |
Bleeding new brake lines | andyb | SV Talk, Tuning & Tweaking | 1 | 25-01-07 06:10 PM |
Brake Bleeding - Two Questions | Colboy | SV Talk, Tuning & Tweaking | 16 | 24-01-07 10:04 PM |