SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
im after the seal that goes under bearing on the steering tube on the bottom yoke of the forks..? anyone know where to get one> the bearing kit is £80, and my bearing is in good working order...!
thanks Toby |
![]() |
![]() |
#2 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
How are you going to replace that without damaging the lower race by removal?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
i removed the bearing from the steering tube using the dust seal as a barrier to protect the lower race..
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
anyone know?
|
![]() |
![]() |
#5 |
Trinity
Mega Poster
Join Date: Jun 2006
Location: Guildford
Posts: 8,027
|
![]() |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Only Suzuki bearings come with the actual seal on the bottom bearing. It's actually part of the bearing I believe.
I found this out when I got some replacements and asked for the cheaper one's which turned out not to have it. |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
Do'h my mistake. Sorry for misleading you matey.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weeping Fork Seal | plowsie | SV Talk, Tuning & Tweaking | 12 | 15-04-09 02:54 PM |
Steering Yoke bearing seal | Tobes | Stuff Wanted | 0 | 30-03-09 02:17 PM |
Headstock bearing/fork knock | swinging_simian | SV Talk, Tuning & Tweaking | 6 | 21-08-08 08:44 AM |
Fork seal again | dirtydog | SV Talk, Tuning & Tweaking | 12 | 03-12-07 10:34 PM |
Fork Oil Seal Change: | MrMessy | SV Talk, Tuning & Tweaking | 1 | 03-08-05 03:52 PM |