GSXR600 K8 front end - SV650.org

Nobbylad · 03-10-09, 01:45 PM

I am selling the bits that I bought recently to upgrade the front end of my SV. I've decided to keep the SV as it is and get a different bike next spring. I bought these off eBay for a total price of £425 and took a partial refund of £19 to reflect the fact that the two steering stem lock nuts have slight damage (not seen when fitted) and the cover plate is slightly bent (again not seen when fitted). All I've done is unpack the items and give them a bit of a clean. The items are as seen in the pics and include:- Forks, yokes (top & bottom), steering stem, bearings, steering damper, calipers, master cylinder, front lever and lines. I also have some clip ons and another top yoke (not sure which year) which I bought from Sean_C on here for £50. I'm looking for £475 for the lot plus postage and packing. I'll also throw in some magnets that are suitable for the speedo conversion when used with the appropriate Hall effect sensor. Any questions, please pm me. I plan to advertise these on Gixer junkies as well and then eBay if I don't get any takers within a week or so. Thanks for looking....Mark

03-10-09, 02:16 PM

Mmmmmmmmmm sexy forks! Sally are you watching?

03-10-09, 11:21 PM

If only i had buggering well seen this a month or so ago before i just replaced my boring out standard curvy forks

Looks great good luck on the sale man.

yorkie_chris · 04-10-09, 12:29 AM

That other yoke you've got looks like an SRAD750 one

Nobbylad · 04-10-09, 09:27 AM

Cheers Chris Now up on Gixer junkies, eBay prob next weekend, would prefer they go to someone off here. Willing to sell the clip ones + SRAD yoke (if that's what it is) separately, again, what I paid which is £50. Cheers. (P.S. My original plan was to do the swap then sell the SV bits which would probably net a few hundred quid, leaving a difference probably just a little more than the cost of getting linear or progressive springs fitted for the front).

Nobbylad · 06-10-09, 02:11 PM

Calipers, master cylinder, lines and lever now sold.

Forks, yokes, steering stem, bearings etc - £350

SRAD yoke and clip ons - £50

Going on eBay in next day or so.

Nobbylad · 14-10-09, 10:08 AM

Forks, yokes, steering stem, bearings now on eBay => http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

Nobbylad · 24-10-09, 12:36 PM

Quote:

Originally Posted by Nobbylad

The forks and calipers are now sold, however I still have the top yoke and clipons if anyone wants them.

03-10-09, 01:45 PM	#1
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	GSXR600 K8 front end I am selling the bits that I bought recently to upgrade the front end of my SV. I've decided to keep the SV as it is and get a different bike next spring. I bought these off eBay for a total price of £425 and took a partial refund of £19 to reflect the fact that the two steering stem lock nuts have slight damage (not seen when fitted) and the cover plate is slightly bent (again not seen when fitted). All I've done is unpack the items and give them a bit of a clean. The items are as seen in the pics and include:- Forks, yokes (top & bottom), steering stem, bearings, steering damper, calipers, master cylinder, front lever and lines. I also have some clip ons and another top yoke (not sure which year) which I bought from Sean_C on here for £50. I'm looking for £475 for the lot plus postage and packing. I'll also throw in some magnets that are suitable for the speedo conversion when used with the appropriate Hall effect sensor. Any questions, please pm me. I plan to advertise these on Gixer junkies as well and then eBay if I don't get any takers within a week or so. Thanks for looking....Mark Last edited by Nobbylad; 03-10-09 at 01:46 PM.

03-10-09, 02:16 PM	#2
svdemon Guest Posts: n/a	Re: GSXR600 K8 front end Mmmmmmmmmm sexy forks! Sally are you watching?

03-10-09, 11:21 PM	#3
Elltg Guest Posts: n/a	Re: GSXR600 K8 front end If only i had buggering well seen this a month or so ago before i just replaced my boring out standard curvy forks Looks great good luck on the sale man.

04-10-09, 12:29 AM	#4
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: GSXR600 K8 front end That other yoke you've got looks like an SRAD750 one __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

04-10-09, 09:27 AM	#5
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR600 K8 front end Cheers Chris Now up on Gixer junkies, eBay prob next weekend, would prefer they go to someone off here. Willing to sell the clip ones + SRAD yoke (if that's what it is) separately, again, what I paid which is £50. Cheers. (P.S. My original plan was to do the swap then sell the SV bits which would probably net a few hundred quid, leaving a difference probably just a little more than the cost of getting linear or progressive springs fitted for the front).

06-10-09, 02:11 PM	#6
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR600 K8 front end Calipers, master cylinder, lines and lever now sold. Forks, yokes, steering stem, bearings etc - £350 SRAD yoke and clip ons - £50 Going on eBay in next day or so.

14-10-09, 10:08 AM	#7
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR600 K8 front end Forks, yokes, steering stem, bearings now on eBay => http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone gone from SV to K5 GSXR600	Miles	Bikes - Talk & Issues	98	01-05-09 08:16 AM
gsxr600 k8	gaz-sv650s	Bikes - Talk & Issues	7	17-07-08 08:26 AM
GSXR600 SRAD Front end - how easy?	skov	SV Talk, Tuning & Tweaking	23	17-05-08 07:31 PM
new GSXR600	svracers	SV Ecosse	14	28-01-06 09:30 PM