SV650.org - SV650 & Gladius 650 Forum



For Sale - SV's and SV related items For SV's and SV spare parts only. 650 or 1000 No other items Unsanctioned trade ads will be deleted as will spam and chat.

Reply
 
Thread Tools
Old 15-05-10, 12:11 PM   #1
barwel1992
Guest
 
Posts: n/a
Default K3 sv650 front end bit's

sticking this up now just to get the ball rolling These Items will be officially FOR SALE OF LATE NEXT WEEK OR EARLY FOLLOWING WEEK but you can have first dibs now

SV650 K3 Parts

the things i have are

Front wheel, straight good condition, silver, new bearings and seal's late last year (they have 2000 miles about) comes with spare dust seal does not include disks/bolt,axle,tire,speedo sensor £70 + £15 postage


Front Calliper's (pair) Good seals recent serviced, (will clean a grease them up again) including slide bracket thing, Sinterd HH Pads only about 800 miles on them, including bleed nipple (not including banjo bolt) not including mount bolts £60 + £10 postage

SS Front Brake Lines These are for a Naked bike, they are slightly longer to take accommodate for renthal bars they are cobra (rebranded hel) race lines (2 lines) and are less than 3 months old, good condition, will include the calliper banjo bolts, and a fine thread dobble bolt for the master cylinder side (might not fit your MC as some are different thread pitch) SOLD (£25inc P&P badger)

Front Fork Legs, slightly bent, needs new slider tubes, stock springs, will need new oil (will be emptied) and fork sliders and one of the fork shields has been broken, overall good condition slight flaking and scuff on the bottom of the right side leg, will include pinch bolt and preload adjusters £30+ £15 postage

Fork Springs .9kg/nm K-tech fork springs these were used for a week (i kid you not) i will also include the correct spacer i pay'd £80 ill take SOLD (£60 Inc postage Speedy)

Front axle, usual used condition £5 + £5 postage

Brake disks 4.5mm thick aprox, no rattle SOLD (£30 inc P&P flymo)

I need to check the forks and K-tech fork spring over and double check every thing else, to make sure it is as described

I will be able to do combined postage on multiple thing things (will be using a courier, and one large package is cheaper than multiple small items)

PS IN the next week item detail may change

Pictures will Be added Tomorrow or Wednesday

Thanks For looking

In light of another thread on hear about items not been sent hear is my ebay feedback page

Last edited by barwel1992; 18-05-10 at 03:29 PM.
  Reply With Quote
Old 15-05-10, 02:50 PM   #2
xXBADGERXx
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

How long are the lines Barwell , I am slinging some SV1000 brakes on my bike and could do with slightly longer lines .
  Reply With Quote
Old 15-05-10, 05:02 PM   #3
Speedy
Member
Mega Poster
 
Join Date: Apr 2006
Location: Biggin Hill,Kent
Posts: 1,074
Default Re: K3 sv650 front end bit's

PM'd!!!
Speedy is offline   Reply With Quote
Old 15-05-10, 07:36 PM   #4
pojic
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

If the brake lines are plain silver in colour and still available, I'll take them.
Cheers,
pojic
  Reply With Quote
Old 15-05-10, 07:48 PM   #5
barwel1992
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

all PM's replied

and will measure the line for you badger, pojic they are plain silver , if badger doesn't want them they you can have them
  Reply With Quote
Old 16-05-10, 04:30 PM   #6
BomBalong
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

and if they dont take the brake lines barwel can i has?
  Reply With Quote
Old 16-05-10, 11:48 PM   #7
barwel1992
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

^ indeed you can

right pics and more info now

disk's these have no rattles, and are about 4.5mm thick




wheel



Brake lines, these do not come with crush washers and the MC banjo may not fit(some are diff) lenghts are 86cm (middle to middle of banjo holes) and 87.5cm for the left hand (longer) line not exact measurements as they were a pain to measure



calipers, cleaned and greased load of pad left






Axle
  Reply With Quote
Old 17-05-10, 06:14 PM   #8
barwel1992
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

bump any one elses intrested in any of this
  Reply With Quote
Old 17-05-10, 06:50 PM   #9
xXBADGERXx
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

The lines are 10cm longer than my current ones so they sound ideal for what I need , I measured mine with string from centre to centre and they are shorter than yours so I will take them sir , consider them now sold along with that other item we discussed in PM
  Reply With Quote
Old 17-05-10, 06:52 PM   #10
barwel1992
Guest
 
Posts: n/a
Default Re: K3 sv650 front end bit's

PM heading your way
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SV650 Front Wheel - Do any other Suzuki models use the same front wheel? williamturner1 SV Talk, Tuning & Tweaking 11 30-05-10 02:31 PM
Bit's n bob's inc chain, srockets and bronze undertray chunkytfg For Sale - Other Bikes and General biking items 5 25-03-09 11:18 AM
Bit's i still got left svrash For Sale - SV's and SV related items 15 04-08-08 09:38 PM
Front Discs (pair) for sv650 '99 curvy + Front wheel mikeSV Stuff Wanted 1 28-05-08 04:21 PM
Anything from an '04 SV650/S front-end tekjunkie Stuff Wanted 2 17-04-07 10:27 PM


All times are GMT. The time now is 04:39 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.