Pointy to go asap

K3 downpipes which were cut to take an after Market end can. Note the front pipe is dented so would need changing
£20 posted


K3 front wheel powder coated with discs £80 posted but has been down the road which has scuffed the wheel in 3 parts along the rim edge a fresh powder coat will sort it.
£35 just the wheel posted and £40 just the discs posted


K4 petrol tank resprayed mica red. This has a dent which is easily fixed. There is no leaks or splits.
£40 posted


K3 650 calipers which hh pads.
I resprayed these with hammerit and left in a box but the dot4 has eaten the paint so the original paint is showing through now. They need a good scrub to get back to the old paint or just repaint them. The pads have loads of meat left and the seals are fine.
£25 posted



Smashed clocks these were bought to repair another set I had but never got round to it. It may be usefull for sparses
£10 posted


Gb moto right rear set. The anodise is turning purple on this comes with spare peg rrp £95. My price £40 posted


K4 650 throttle bodies but will fit other models.
These are 300miles old from new, the stdv system was removed from this unit for a track
Bike. I does not have the tps or injectors by I can get those if needed.
£15 posted


K3 speedo drive fully working when removed but the cable has been cut off but still useable whith another cable.
£5 posted

Damn I'll edit this at lunch

that just the one RHS rear set, or you flogging the pair?

Just the one as the left went walkies

Edited with the right pictures and added more items.

More to follow tonight

Hello

Will the calipers fit my K1 Curvy ?

Rgds

[punyXpress]

Put K7 calipers on my K2 courtesy of Nobbylad so you will be OK

PM sent for the clip ons

Thanks

[Nobbylad]

Originally Posted by punyXpress

Put K7 calipers on my K2 courtesy of Nobbylad so you will be OK

They were K8 calipers (although exactly the same) and you've just reminded me I have another set to put up for sale!

Pms replied