![]() |
#1 |
Guest
Posts: n/a
|
![]()
Planning on putting a set of race cams in my supertwin over the winter, any recomendations? Kent cams, Spears cams or is there anything else?
|
![]() |
![]() |
#2 | |
Guest
Posts: n/a
|
![]() Quote:
![]() |
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
I believe the way Kent Cams work their's is to remove metal from the opposite side from the lobe and then when you re-shim them you effectvely get "higher" lift.
Others either manufacture from scratch or add metal to the existing lobes and reprofile. I believe JHS have a good rep. C Last edited by Berlin; 30-10-10 at 04:23 PM. |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
We use Kent Cams in ours.
|
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
"Minitwin championship winners 4th year in a row!!. Yay!"
Out of curiosity Sarah are you limited to the 72bhp? Last edited by weecorey; 02-11-10 at 10:03 PM. |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
Yup in the tuned SV motors both 650 and 700cc versions. I cant give an exact BHP figure as we have only ever fitted them with other tuning work but the lastest spec ones made 2bhp more and held the power longer than the original spec Kent cams. No problems running them, the top end on the SV is pretty much bomb proof.
|
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
We have been using Kent for a while & built the fastest SV's in Ireland this year.
Mark Glasgow won the National & Kildare championships & Michael Sweeney had wins & podiums on roads & short circuits. Brian |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Injected Cams | sweepdoggydog | Stuff Wanted | 1 | 01-08-16 09:32 PM |
Race scrubs, injection cams and any other racing parts. | gavd | Stuff Wanted | 1 | 16-06-10 01:45 AM |
Web Cams | Speedy Claire | Idle Banter | 31 | 14-01-09 09:24 PM |
K3> exhaust cams for sale, also carbed model intake cams | northwind | For Sale - SV's and SV related items | 0 | 14-09-06 11:04 PM |
SV 650 CAMS wanted K3-K6 injector pointy cams wanted | alien19779 | Stuff Wanted | 3 | 09-03-06 07:01 PM |