R & G Spools, bar ends and Chewys Tank Raisers - SV650.org

10-11-11, 08:47 PM

Hi I've sold my SV so the following are for sale:

R & G Rear swingarm spools £15 + £5 postage
R & G Bar ends £15 + £5 postage
Chewys Tank Raisers £5 posted.

All are in good condition. The spools have a few marks from my paddock stand but nothing major. The R & G writing on the spools and bar ends is slightly faded but not too bad.

Obviously they can be picked up for anyone nearby.

[IMG]

[/IMG]

[IMG]

[/IMG]

11-11-11, 12:48 PM

Heard about these tank raisers, did it do anything for the bike?

11-11-11, 02:42 PM

hard to tell tbh. they were fitted when I bought the bike. I put a set of loud race cans on mine and these give a fair bit extra induction noise, so I ended up removing them.

Have a look here though, they have a dyno print before and after:

http://www.chewys-stuff.co.uk

Can't argue with that I suppose!

16-11-11, 12:57 PM

Any offers before I put them on eBay?

25-11-11, 08:00 AM

These are on ebay and finishing tonight. Some bargains to be had:

http://www.ebay.co.uk/sch/gavimcc/m....id=p4340.l2562

10-11-11, 08:47 PM	#1
gavinsky23 Guest Posts: n/a	R & G Spools, bar ends and Chewys Tank Raisers Hi I've sold my SV so the following are for sale: R & G Rear swingarm spools £15 + £5 postage R & G Bar ends £15 + £5 postage Chewys Tank Raisers £5 posted. All are in good condition. The spools have a few marks from my paddock stand but nothing major. The R & G writing on the spools and bar ends is slightly faded but not too bad. Obviously they can be picked up for anyone nearby. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]

11-11-11, 12:48 PM	#2
quik_d Guest Posts: n/a	Re: R & G Spools, bar ends and Chewys Tank Raisers Heard about these tank raisers, did it do anything for the bike?

11-11-11, 02:42 PM	#3
gavinsky23 Guest Posts: n/a	Re: R & G Spools, bar ends and Chewys Tank Raisers hard to tell tbh. they were fitted when I bought the bike. I put a set of loud race cans on mine and these give a fair bit extra induction noise, so I ended up removing them. Have a look here though, they have a dyno print before and after: http://www.chewys-stuff.co.uk Can't argue with that I suppose!

16-11-11, 12:57 PM	#4
gavinsky23 Guest Posts: n/a	Re: R & G Spools, bar ends and Chewys Tank Raisers Any offers before I put them on eBay?

25-11-11, 08:00 AM	#5
gavinsky23 Guest Posts: n/a	Re: R & G Spools, bar ends and Chewys Tank Raisers These are on ebay and finishing tonight. Some bargains to be had: http://www.ebay.co.uk/sch/gavimcc/m....id=p4340.l2562

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tank raisers	yorkie_chris	SV Talk, Tuning & Tweaking	34	07-02-10 05:43 PM
DIY Tank raisers	Lozzo	SV Talk, Tuning & Tweaking	40	07-01-10 07:34 PM
tank raisers, are you aloud them	trialspaul	Mini-Twins	6	23-02-09 05:20 PM
tank raisers	yorkie_chris	SV Talk, Tuning & Tweaking	30	21-11-07 12:54 AM
Tank Raisers	redeye321	SV Talk, Tuning & Tweaking	10	29-05-05 10:52 AM