 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
22-04-12, 05:12 PM
|
#1 |
|
Member
Mega Poster
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
|
Fitting carbtune hoses to the throttle body
Gawd what a fiddly nightmare btw!
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts  ), drop it & fix it again!K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. |
|
|
|
22-04-12, 05:14 PM
|
#2 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Fitting carbtune hoses to the throttle body
Indeed.
Try it on a hot engine.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
22-04-12, 08:30 PM
|
#3 |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: Fitting carbtune hoses to the throttle body
so easy on a sv
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
22-04-12, 08:57 PM
|
#4 |
|
Member
Mega Poster
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
|
Yer kidding. Theres no way my fingers were getting in to take off the rubber stoppers easily.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again!K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. |
|
|
|
|
22-04-12, 09:12 PM
|
#5 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: Fitting carbtune hoses to the throttle body
Quote:
front cylinder, you put yr hand up from the bottom behind the rad (poss unbolt rad at bottom and pull forwards) while layed down, easy, to make that easier in the future put a small bit of rubber hose on there and block it afterwards leaving it hanging down.
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
|
22-04-12, 09:48 PM
|
#6 |
|
No, I don't lend tools.
Mega Poster
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
|
Re: Fitting carbtune hoses to the throttle body
That's carbs - try it on an FI system. OP says 'throttle body'.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" |
|
|
|
|
22-04-12, 09:50 PM
|
#7 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: Fitting carbtune hoses to the throttle body
Quote:
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
|
22-04-12, 10:07 PM
|
#8 |
|
No, I don't lend tools.
Mega Poster
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
|
Re: Fitting carbtune hoses to the throttle body
Thought so.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" |
|
|
|
|
23-04-12, 07:24 AM
|
#9 |
|
Member
Mega Poster
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
|
Re: Fitting carbtune hoses to the throttle body
Now its a toss up between not doing the extended hose mod out of the bodies for future balance or not. If i do this once a year then taking off all of those bits would be something i would do anyway to clean it up.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again!K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pointy 650 throttle body f/s | jimathyy | For Sale - SV's and SV related items | 0 | 29-02-12 04:47 PM |
| Throttle Body Synchronisation | Blue Flame | SV Talk, Tuning & Tweaking | 6 | 21-04-08 06:10 AM |
| Throttle body synchronisation K3 | muzikill | SV Talk, Tuning & Tweaking | 23 | 23-01-08 06:35 PM |
| Throttle body balancing | Caddy2000 | SV Talk, Tuning & Tweaking | 6 | 18-05-07 06:22 PM |
| Throttle body diameter | danci1973 | SV Talk, Tuning & Tweaking | 1 | 05-12-04 11:34 AM |
