R&G frame sliders help please. - SV650.org

22-06-13, 08:21 AM

Hi all,
I have a set of frame sliders from r&g for my 04 sv650 naked.
These are a ebay win so I have the complete kit but no instructions

They are the ones with the bolt that goes right threw the frame,i have looked at the instructions on r&g,s website but they make no sense to me at all.
Can anyone give me some hints on fitting them PLEASE??????

Many thanks...

22-06-13, 08:39 AM

Pretty sure the long bolt goes through the frame and engine! The engine would need supporting from underneath so you can remove bolt and then add the bungs

Don't know anymore Han that though

Might need the bike to be upright so if you don't have a paddock stand maybe use ratchet strap from the bars to the roof to take the weight

maviczap · 22-06-13, 09:28 AM

You won't need to support the weight of the engine, as the other engine mounts will take the weight.

maviczap · 22-06-13, 09:32 AM

If you have the same ones as in this pic, looks like you need to remove the long engine mounting bolt in the centre of the engine and replace it with the RG one?

Then the sliders attach some how to the other bits in your kit?

http://www.bikehps.com/acatalog/Suzu...rotectors.html

muzikill · 22-06-13, 09:44 AM

Quote:

Originally Posted by maviczap

You won't need to support the weight of the engine, as the other engine mounts will take the weight.

Unless the engine was mounted slightly off kilter. A trolley jack can be used to lift the engine if you have problems removing any bolts.

Different fitting of r&g sliders than the k3s btw.

22-06-13, 12:11 PM

Quote:

Originally Posted by maviczap

You won't need to support the weight of the engine, as the other engine mounts will take the weight.

+1

22-06-13, 04:02 PM

Many thanks guys all fitted quite an easy job all in all.

muzikill · 22-06-13, 05:19 PM

How foosty did the bolt look? Lol

22-06-13, 08:44 PM

Quote:

Originally Posted by muzikill

How foosty did the bolt look? Lol

Lost me there buddy

muzikill · 23-06-13, 07:17 AM

Middle bolt look rough when you took it out?

22-06-13, 08:21 AM	#1
disco2 Guest Posts: n/a	R&G frame sliders help please. Hi all, I have a set of frame sliders from r&g for my 04 sv650 naked. These are a ebay win so I have the complete kit but no instructions They are the ones with the bolt that goes right threw the frame,i have looked at the instructions on r&g,s website but they make no sense to me at all. Can anyone give me some hints on fitting them PLEASE?????? Many thanks...

22-06-13, 08:39 AM	#2
Dabteacake Guest Posts: n/a	Re: R&G frame sliders help please.. Pretty sure the long bolt goes through the frame and engine! The engine would need supporting from underneath so you can remove bolt and then add the bungs Don't know anymore Han that though Might need the bike to be upright so if you don't have a paddock stand maybe use ratchet strap from the bars to the roof to take the weight

22-06-13, 09:28 AM	#3
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: R&G frame sliders help please.. You won't need to support the weight of the engine, as the other engine mounts will take the weight. __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

22-06-13, 09:32 AM	#4
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: R&G frame sliders help please.. If you have the same ones as in this pic, looks like you need to remove the long engine mounting bolt in the centre of the engine and replace it with the RG one? Then the sliders attach some how to the other bits in your kit? http://www.bikehps.com/acatalog/Suzu...rotectors.html __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

22-06-13, 04:02 PM	#7
disco2 Guest Posts: n/a	Re: R&G frame sliders help please.. Many thanks guys all fitted quite an easy job all in all.

22-06-13, 05:19 PM	#8
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: R&G frame sliders help please.. How foosty did the bolt look? Lol __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

23-06-13, 07:17 AM	#10
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: R&G frame sliders help please.. Middle bolt look rough when you took it out? __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which frame sliders?	liam111	Bikes - Talk & Issues	3	28-01-13 12:37 PM
LSL Frame sliders?	Dabteacake	SV Talk, Tuning & Tweaking	5	27-09-12 07:04 PM
SV650S Frame Sliders	sv650sfan	Bodywork	3	26-06-07 08:08 AM
Suzuki frame sliders	Jimmie	SV Talk, Tuning & Tweaking	13	31-01-06 09:45 AM