k4 sv650 clearout (+some k1 GSXR bits) - SV650.org

bobw1985 · 12-04-14, 05:15 PM

It's been a long time since I got rid of my K4 sv650, but I've been a bit lazy when it comes to sorting out the bits and pieces left. I had a bit of an off, and did a GSXR swap following, so there's quite a bit of stuff - some in a bit of an unknown condition.

I thought I'd offer it up before I tried ebay.

It's been a while since I priced this stuff up, so make me an offer if you think I'm way off.

Standard screen - good condition £10 + postage

Powerbronze double bubble light tint - SOLD

Front mudguard Grand Candy Blue (YC2) - a few scratches, particularly around the bolt hole (shown) £20 + postage

Fairing in-fill panel - good condition SOLD

Fairing + Front lights - cracked, scratched and missing one sidelight - £postage?

Front spindle - good condition £5 + postage

Delkevic oval stainless steel stubby - hardly used - SOLD

Silver Front wheel with two good discs and barely touched pilot road 2 tyre - £100 + postage

SV650 Front forks - condition unknown (for spares/repairs I'd imagine), remains of a bolt stuck in the mudguard mounting hole on the right side - SOLD

Front fairing/instrument sub-frame - SOLD

Front brakes - plenty of pad left, definitely need bleeding, could use a clean - SOLD

SV650 clip-ons right side probably bent £postage

SV650 top yoke - condition unknown £postage

SV650 bottom yoke - condition unknown £postage

Chewy's mirror spacers (haven't managed to find the bolts) SOLD

Original collector pipes, cut for aftermarket exhaust - SOLD

GSXR k1 600 forks + yokes (top yoke appears to have been painted white) - seemingly good condition, but never fitted (I was going to use these, but found a k4 front end for a decent price) £70 + postage

GSXR 600 K4 top yoke - good condition, used for bit before I put a handlebar conversion kit on £20 + postage

GSXR 600 K4 clip ons £20 + postage

12-04-14, 06:07 PM

pm'ed for the end can

12-04-14, 09:16 PM

Also interested in the end can if spoeluk doesn't take it

muzikill · 12-04-14, 10:14 PM

Ill take the powerbronze double bubble screen. The cut collector pipe and the forks. (Hope they fit a k3)

Sent from my GT-I9505 using Tapatalk

bobw1985 · 13-04-14, 11:05 AM

PMs sent.

13-04-14, 04:01 PM

end can sold!

electricheadx · 14-04-14, 12:11 PM

I'll take the mirror spacers please.

Sent from my GT-N7100 using Tapatalk 4

14-04-14, 05:29 PM

Infill please

cheers jon

15-04-14, 04:54 PM

Where in Glasgow? Do you still have the Haynes manual?

muzikill · 17-04-14, 07:47 PM

Received bob.

Sent from my GT-I9505 using Tapatalk

12-04-14, 05:15 PM	#1
bobw1985 Member Join Date: Mar 2010 Posts: 58	k4 sv650 clearout (+some k1 GSXR bits) It's been a long time since I got rid of my K4 sv650, but I've been a bit lazy when it comes to sorting out the bits and pieces left. I had a bit of an off, and did a GSXR swap following, so there's quite a bit of stuff - some in a bit of an unknown condition. I thought I'd offer it up before I tried ebay. It's been a while since I priced this stuff up, so make me an offer if you think I'm way off. Standard screen - good condition £10 + postage Powerbronze double bubble light tint - SOLD Front mudguard Grand Candy Blue (YC2) - a few scratches, particularly around the bolt hole (shown) £20 + postage Fairing in-fill panel - good condition SOLD Fairing + Front lights - cracked, scratched and missing one sidelight - £postage? Front spindle - good condition £5 + postage Delkevic oval stainless steel stubby - hardly used - SOLD Silver Front wheel with two good discs and barely touched pilot road 2 tyre - £100 + postage SV650 Front forks - condition unknown (for spares/repairs I'd imagine), remains of a bolt stuck in the mudguard mounting hole on the right side - SOLD Front fairing/instrument sub-frame - SOLD Front brakes - plenty of pad left, definitely need bleeding, could use a clean - SOLD SV650 clip-ons right side probably bent £postage SV650 top yoke - condition unknown £postage SV650 bottom yoke - condition unknown £postage Chewy's mirror spacers (haven't managed to find the bolts) SOLD Original collector pipes, cut for aftermarket exhaust - SOLD GSXR k1 600 forks + yokes (top yoke appears to have been painted white) - seemingly good condition, but never fitted (I was going to use these, but found a k4 front end for a decent price) £70 + postage GSXR 600 K4 top yoke - good condition, used for bit before I put a handlebar conversion kit on £20 + postage GSXR 600 K4 clip ons £20 + postage Last edited by bobw1985; 16-04-14 at 09:36 PM. Reason: sold items

12-04-14, 06:07 PM	#2
sopeluk Guest Posts: n/a	Re: k4 sv650 clearout (+some k1 GSXR bits) pm'ed for the end can

12-04-14, 09:16 PM	#3
nicka Guest Posts: n/a	Re: k4 sv650 clearout (+some k1 GSXR bits) Also interested in the end can if spoeluk doesn't take it

12-04-14, 10:14 PM	#4
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: k4 sv650 clearout (+some k1 GSXR bits) Ill take the powerbronze double bubble screen. The cut collector pipe and the forks. (Hope they fit a k3) Sent from my GT-I9505 using Tapatalk __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

13-04-14, 11:05 AM	#5
bobw1985 Member Join Date: Mar 2010 Posts: 58	Re: k4 sv650 clearout (+some k1 GSXR bits) PMs sent.

13-04-14, 04:01 PM	#6
sopeluk Guest Posts: n/a	Re: k4 sv650 clearout (+some k1 GSXR bits) end can sold!

14-04-14, 12:11 PM	#7
electricheadx Member Join Date: Mar 2008 Posts: 69	Re: k4 sv650 clearout (+some k1 GSXR bits) I'll take the mirror spacers please. Sent from my GT-N7100 using Tapatalk 4

14-04-14, 05:29 PM	#8
jon84 Guest Posts: n/a	Re: k4 sv650 clearout (+some k1 GSXR bits) Infill please cheers jon

15-04-14, 04:54 PM	#9
bmack999 Guest Posts: n/a	Re: k4 sv650 clearout (+some k1 GSXR bits) Where in Glasgow? Do you still have the Haynes manual?

17-04-14, 07:47 PM	#10
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: k4 sv650 clearout (+some k1 GSXR bits) Received bob. Sent from my GT-I9505 using Tapatalk __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SV Bits clearout	andrewsmith	For Sale - SV's and SV related items	10	08-11-13 07:14 PM
SV650 Parts Clearout - Take a Peak...	cbay	For Sale - SV's and SV related items	26	02-03-12 07:18 PM
sv650 curvy for sale + GSXR BITS	gruff	For Sale - SV's and SV related items	6	15-04-08 07:28 AM
Curvey bits clearout	fitz2007	For Sale - SV's and SV related items	3	01-02-08 09:07 PM
Yellow Curvey bits and pieces - Clearout Sale	hovis	For Sale - SV's and SV related items	61	01-11-07 05:26 PM