Bulbs!!!

Before i start stripping the whole front end, does anyone know what bulbs are installed for lighting the speedo etc

According to the Haynes manual they are 14v 0.84watt x3 - and looking at how you replace them on my bike I'd have to take the bikini fairing off and the unit with my clocks in, the plugs are round the back to get to the bulbs.

I have a strange situation where at night only the top sections of my rev counter and speedo are visible....not sure what has happened to the bulbs.... have yours gone?

[Viney]

Replace with 1.2w ones from Halfords or suchlike already fitted in bulb holders. Standard Dash lights they are. All 3 must replace should you..sorry gone all yoda! Its a pig of a job on the s as the entire front fairing, screen, mirrors, clocks have to come off, then you have to take the clocks apart. id advise led's but you cant get an led with a wide enough spread on it, as i have found.

Replace with 1.2w ones from Halfords or suchlike already fitted in bulb holders. Standard Dash lights they are.

theres one in the Old Kent Road opposite where I work So will be up there dinner time. All ready to do the deed in my workshop tonight (after work of course )

[Viney]

Originally Posted by bluesvrider

theres one in the Old Kent Road opposite where I work So will be up there dinner time. All ready to do the deed in my workshop tonight (after work of course )

Good man.