fitting a number plate to this..??? - SV650.org

20-06-06, 11:18 AM

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEBI%3AIT&rd=1

how would i go about fitting a number plate and plate light to this undertray???

20-06-06, 11:22 AM

R-Send and LEDs from above?

20-06-06, 12:21 PM

Looks like it has a 'lip' on the right hand side of the pic.
You'd prob put an r-send on this, drill 2 holes and put plate on r-send bracket.

Possibly LEDs then drilled in from above, or a LED numberplate light from Ebay...

dirtydog · 20-06-06, 01:58 PM

i've got one of those undertrays here as i bought one for my sv but not fitted it yet. It does have a lip on it that you would be able to screw an r-send to

20-06-06, 02:11 PM

but would it be very solid just screwed into plastick.???

id have to make soemthing to strenghtem it out of alli or somthing..

also would it effect the under seat compartment at all?..

i have intergrated indicators in my tail light so thats the only reason why i want an under tray realy,

if it aint gonna be strong for the number plate i wont bother lol

dirtydog · 20-06-06, 02:23 PM

the undertray is fibreglass and is pretty solid, shouldn't have any problem with the underseat storage either should be the same

20-06-06, 02:30 PM

hmm might be worth it then

get a plate bracket and a led number plate light from gay bay and just figure something out..

thnx guys

dene

20-06-06, 02:55 PM

I bought a cheap original 'snow shovel' mud guard from FleaBay at a tenner as I needed to cut the original to maintain mounting points to rear subframe. (4 bolts)

Reason I bought a 2nd hand one was I didn't wanna chop my original in case I needed to put it back on or things went t**s up!

The underseat storage remains pretty much the same as original, f**k all space!

My undertray is fibreglass and as long as you drill carefully, using a pilot hole you can use self tapping screws quite sufficiently and it bites and holds.
If your worried about that, drill to a bolt hole size and use a nut on the other side to hold in place. It won't drop off then and you can use a nyloc nut or spring washer to prevent things from vibrating loose!....

20-06-06, 11:18 AM	#1
BIKER-DENE Guest Posts: n/a	fitting a number plate to this..??? http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEBI%3AIT&rd=1 how would i go about fitting a number plate and plate light to this undertray???

20-06-06, 01:58 PM	#4
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	i've got one of those undertrays here as i bought one for my sv but not fitted it yet. It does have a lip on it that you would be able to screw an r-send to __________________ 2011 Speed Triple 1050

20-06-06, 02:23 PM	#6
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	the undertray is fibreglass and is pretty solid, shouldn't have any problem with the underseat storage either should be the same __________________ 2011 Speed Triple 1050

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
number plate	wilky007	SV Talk, Tuning & Tweaking	18	09-02-09 09:28 PM
number plate	Wideboy	South & West Surfers	37	02-10-08 02:39 PM
9 X 2 Number plate	FG1	Idle Banter	1	16-07-07 09:25 PM
9x3 Number plate	danf1234	SV Talk, Tuning & Tweaking	24	24-05-07 02:21 PM
Best Car Number plate ever	Diveboy	Idle Banter	45	03-02-06 11:39 PM

20-06-06, 11:22 AM	#2
PBx Guest Posts: n/a	R-Send and LEDs from above?

20-06-06, 12:21 PM	#3
kciN Guest Posts: n/a	Looks like it has a 'lip' on the right hand side of the pic. You'd prob put an r-send on this, drill 2 holes and put plate on r-send bracket. Possibly LEDs then drilled in from above, or a LED numberplate light from Ebay...

20-06-06, 02:11 PM	#5
BIKER-DENE Guest Posts: n/a	but would it be very solid just screwed into plastick.??? id have to make soemthing to strenghtem it out of alli or somthing.. also would it effect the under seat compartment at all?.. i have intergrated indicators in my tail light so thats the only reason why i want an under tray realy, if it aint gonna be strong for the number plate i wont bother lol

20-06-06, 02:30 PM	#7
BIKER-DENE Guest Posts: n/a	hmm might be worth it then get a plate bracket and a led number plate light from gay bay and just figure something out.. thnx guys dene

20-06-06, 02:55 PM	#8
kciN Guest Posts: n/a	I bought a cheap original 'snow shovel' mud guard from FleaBay at a tenner as I needed to cut the original to maintain mounting points to rear subframe. (4 bolts) Reason I bought a 2nd hand one was I didn't wanna chop my original in case I needed to put it back on or things went ts up! The underseat storage remains pretty much the same as original, fk all space! My undertray is fibreglass and as long as you drill carefully, using a pilot hole you can use self tapping screws quite sufficiently and it bites and holds. If your worried about that, drill to a bolt hole size and use a nut on the other side to hold in place. It won't drop off then and you can use a nyloc nut or spring washer to prevent things from vibrating loose!....