650 pipe on a sv1000 - SV650.org

13-07-06, 08:14 PM

Hi there,

I was wanting to know if the 2 into 1 pipes on the sv650 would fit on the sv1000.

I know the head size would be different but would it work going from the 1st join?

Cheers for any help and sorry for the maybe basic knowledge of how my bike works.

Cheers
Matt

13-07-06, 09:46 PM

I think they are a different diameter pipe, that's only going off looking at my mate's thou and my bike.

Viney · 13-07-06, 09:47 PM

Quote:

Originally Posted by PLAYAROUND

Hi there,

I was wanting to know if the 2 into 1 pipes on the sv650 would fit on the sv1000.

I know the head size would be different but would it work going from the 1st join?

Cheers for any help and sorry for the maybe basic knowledge of how my bike works.

Cheers
Matt

Simple answer, no it wouldnt.

Simple question, WHY?

14-07-06, 04:47 AM

Quote:

Originally Posted by Viney

Simple answer, no it wouldnt.
Simple question, WHY?

I have twin Youshi cans at present but wanted something different. I was even loking at the underseat finish to make the bike look different from the many others.

Matt

fizzwheel · 14-07-06, 07:11 AM

I've seen an SV Thou with a custom M4 system on it that was only a single can.

I would think you're better off selling your Yoshi's and then using the money to get something like that.

Viney · 14-07-06, 07:59 AM

Quote:

Originally Posted by PLAYAROUND

Quote:

Originally Posted by Viney

Simple answer, no it wouldnt.
Simple question, WHY?

I have twin Youshi cans at present but wanted something different. I was even loking at the underseat finish to make the bike look different from the many others.

Matt

Fair enough. As fizz said, id get rid of the Yoshi set up, and trundle off to somewhere like Zorstec, or Renegade for a custom made jobbie. The pipework on the thou is bigger and of a totaly different shape than 650 hence why it wont work.

mattSV · 14-07-06, 11:25 AM

JHS in Bristol do a single pipe conversion for a SV1000.

Not my cup of tea though - I prefer my twin pipes.

14-07-06, 12:31 PM

Quote:

Originally Posted by mattSV

JHS in Bristol do a single pipe conversion for a SV1000.

Not my cup of tea though - I prefer my twin pipes.

Too right! The 2 pipes look, (IMO), much better, especially viewed from the rear!

If I had a thou, I'd be keeping the 2 pipe setup

15-07-06, 11:43 PM

does yoshi not make a 2into1 pipe for the sv im sure that there is one company who does and i think its them or akarapovic

16-07-06, 08:55 AM

There was a picture of an SV1R (i think) race bike on the site a while ago. That had a 2 into 1 pipe, Yoshi i think but i could have been a one-off item.

13-07-06, 08:14 PM	#1
PLAYAROUND Guest Posts: n/a	650 pipe on a sv1000 Hi there, I was wanting to know if the 2 into 1 pipes on the sv650 would fit on the sv1000. I know the head size would be different but would it work going from the 1st join? Cheers for any help and sorry for the maybe basic knowledge of how my bike works. Cheers Matt

14-07-06, 07:11 AM	#5
fizzwheel Super Moderator Mega Poster Join Date: Dec 2003 Location: Somerset Posts: 3,614	I've seen an SV Thou with a custom M4 system on it that was only a single can. I would think you're better off selling your Yoshi's and then using the money to get something like that. __________________ Look Dave, I can see you're really upset about this. I honestly think you ought to sit down calmly, take a stress pill, and think things over. K5 GSXR 750 Anniversary Edition

14-07-06, 11:25 AM	#7
mattSV Member Mega Poster Join Date: Jul 2003 Location: Darn sarf, innit Posts: 2,025	JHS in Bristol do a single pipe conversion for a SV1000. Not my cup of tea though - I prefer my twin pipes. __________________ 2000 - 2004 SV650S 2004 - 2009 SV1000S 2009 - 2013 Triumph Sprint ST1050 2013 - 2016 Triumph Explorer 1200 2016 - Ducati Multistrada DVT S

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WANTED: SV1000 Snorkel / Intake pipe	The Guru	Stuff Wanted	3	19-05-09 07:47 AM
Refitting standard pipe: link pipe?	Jay1	SV Talk, Tuning & Tweaking	6	17-04-08 09:51 AM
exhaust pipe	01 sv650s	SV Talk, Tuning & Tweaking	7	26-11-06 12:42 AM
name that pipe??	oldsvrider	SV Talk, Tuning & Tweaking	11	01-08-06 06:32 PM
Pipe diameter	BoltonSte	SV Talk, Tuning & Tweaking	2	01-02-06 12:40 AM

13-07-06, 09:46 PM	#2
Saint Matt Guest Posts: n/a	I think they are a different diameter pipe, that's only going off looking at my mate's thou and my bike.

15-07-06, 11:43 PM	#9
mart Guest Posts: n/a	does yoshi not make a 2into1 pipe for the sv im sure that there is one company who does and i think its them or akarapovic

16-07-06, 08:55 AM	#10
andyaikido Guest Posts: n/a	There was a picture of an SV1R (i think) race bike on the site a while ago. That had a 2 into 1 pipe, Yoshi i think but i could have been a one-off item.