what solvent and sealant? - SV650.org

11-09-06, 10:36 AM

When removing the valve/rocker covers, Mr Haynes says

Quote:

Clean the mating surface of the cylinder head with solvent, removing all traces of old sealant

and then:

Quote:

Apply the sealant to the cut-outs in the cylinder head where the hasket half-cirlces fit

Apart from quoting the suzuki stuff (Suzuki Bond no. 1207B) they don't go into anymore detail on what the sealant and solvent is.

So:

What are the sealant and solvent as described above more commonly known as

Merci buckets
Luke

Viney · 11-09-06, 11:02 AM

I was under the impression that they have a rubber seal, if thats the case, then i wouldnt use a sealent. However, i have never taken them off so dont know for sure.

11-09-06, 11:09 AM

Quote:

Originally Posted by Viney

I was under the impression that they have a rubber seal, if thats the case, then i wouldnt use a sealent. However, i have never taken them off so dont know for sure.

I agree, I have taken them off and no sealant needed

11-09-06, 11:22 AM

The way that Haynes describe it, I think they want you to peel of the rubber gasket, clean off the old sealant, put fresh sealant on, and seat the gasket back into place. I guess from the replies that most people just leave the gasket in place when removing the cover and avoid resealing it.

11-09-06, 11:29 AM

It is a gasket, by definition it does not need sealing unless there is something wrong with it.

northwind · 11-09-06, 01:16 PM

Pretty sure they have some sort of sealant on from the factory- I remember the drescents being pretty stuck. I just peeled the old muck off and reinstalled dry, worked just fine.

11-09-06, 01:45 PM

me 6

11-09-06, 04:44 PM

drel magic stuff will hold 5 bar wont really need it though

11-09-06, 01:16 PM	#6
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Pretty sure they have some sort of sealant on from the factory- I remember the drescents being pretty stuck. I just peeled the old muck off and reinstalled dry, worked just fine. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gasket Sealant	gettin2dizzy	Bikes - Talk & Issues	5	21-04-09 07:10 PM
What is a High Flashpoint Solvent	2mths	SV Talk, Tuning & Tweaking	23	22-06-07 08:24 AM
where to buy acetone (or other fiberglass resin solvent/cleaner)?	weazelz	SV Talk, Tuning & Tweaking	6	08-05-07 09:09 AM
Sealant	danf1234	SV Talk, Tuning & Tweaking	4	17-02-07 11:54 AM
Solvent for cleaning and soaking carb bits please	petevtwin650	SV Talk, Tuning & Tweaking	11	23-05-06 02:42 PM

11-09-06, 11:02 AM	#2
Viney Member Mega Poster Join Date: Jul 2003 Location: In the shadows to the left Posts: 7,700	I was under the impression that they have a rubber seal, if thats the case, then i wouldnt use a sealent. However, i have never taken them off so dont know for sure.

11-09-06, 11:22 AM	#4
lukemillar Guest Posts: n/a	The way that Haynes describe it, I think they want you to peel of the rubber gasket, clean off the old sealant, put fresh sealant on, and seat the gasket back into place. I guess from the replies that most people just leave the gasket in place when removing the cover and avoid resealing it.

11-09-06, 11:29 AM	#5
andy Guest Posts: n/a	It is a gasket, by definition it does not need sealing unless there is something wrong with it.

11-09-06, 04:44 PM	#8
mart Guest Posts: n/a	drel magic stuff will hold 5 bar wont really need it though