Broken cam plate detent - SV650.org

03-10-06, 02:02 PM

Would this be the reason why I'm missing a gear (I think it's 1st gear I can't find as well as neutral) It's the only reason I can see for my problem!!!

Would this just be wear and tear?

Time to find out how much Mr suzuki wants to rob me off this time.

northwind · 03-10-06, 02:09 PM

PM on its way...

03-10-06, 02:10 PM

Cheers bud.

03-10-06, 02:55 PM

On a side note to let anyone know, phoned fowlers to get hold of a k5 cam plate and it turns out that not only do fowlers not stock them but Suzuki haven't even designated the part with a part number so it'd need to be sorted out in Japan and be shipped over.

Wasn't fowlers fault I guess....it was fowlers fault for not selling me the part whe I told them it was a 99 sv I had, not a 2005 one like I may have implied.

3 times I have used fowlers, 2 times I have been really quite cross at their attitude/policy.

03-10-06, 03:10 PM

Quote:

Originally Posted by instigator

Wasn't fowlers fault I guess....it was fowlers fault for not selling me the part whe I told them it was a 99 sv I had, not a 2005 one like I may have implied.

eh i can see where they are confused...cause i am...so have you a 99 or a K5???

TSM · 03-10-06, 03:19 PM

Get the factory pro one, it may even be a similer cost but better.

03-10-06, 03:26 PM

Quote:

Originally Posted by TSM

Get the factory pro one, it may even be a similer cost but better.

They quoted roughly £45 & vat. The factory pro one I saw was nearer $200

Although I'd love one, I want to keep that kind of expense for the cam swap/system/dynojet/air filter/bandit rear wheel/twin ixil cans that will all come the next 6 months.

sv racer - Got a 1999 model but asked for a k5 part...once I told them I had a 1999 model, they jsut didn't want to deal with me and flat refused to order the part.

TSM · 03-10-06, 03:40 PM

Quote:

Originally Posted by instigator

Quote:

Originally Posted by TSM

Get the factory pro one, it may even be a similer cost but better.

They quoted roughly £45 & vat. The factory pro one I saw was nearer $200

Although I'd love one, I want to keep that kind of expense for the cam swap/system/dynojet/air filter/bandit rear wheel/twin ixil cans that will all come the next 6 months.

sv racer - Got a 1999 model but asked for a k5 part...once I told them I had a 1999 model, they jsut didn't want to deal with me and flat refused to order the part.

For the $200 you get the star/spring/detent arm.

You can just buy the star if you want, have you tried JHS?

03-10-06, 03:45 PM

Not tried JHS, Northwind has kindly offered his old one up which I have accepted

Kudos to that man.

northwind · 03-10-06, 06:53 PM

Hmm, turns out it's 25381-19F00, "plate, gear shif" and costs $22.32. Fowlers have been telling porcupines.

The K5 and 6 part is 25381-19F10... I've never seen one, but from riding K3s and K5s, and my own as standard and with the Factory Pro one, I reckon it's very similiar to the factory pro part's profiles. The detent arm is the same, I think, and will probably still have the riveted roller instead of the teeny bearing on the Factory Pro one. But it does cost a fair bit less

Factory Pro one's not remotely worth the money on a road bike, IMO, unless you get the arm for £10 off Ebay including the gasket, and then you order the Evo star and as a result of a massive ****-up at the company and them taking your money for 5 months and not posting it, you get one for the price of postage. Then it's worth it

03-10-06, 02:02 PM	#1
instigator Guest Posts: n/a	Broken cam plate detent Would this be the reason why I'm missing a gear (I think it's 1st gear I can't find as well as neutral) It's the only reason I can see for my problem!!! Would this just be wear and tear? Time to find out how much Mr suzuki wants to rob me off this time.

03-10-06, 02:09 PM	#2
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	PM on its way... __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

03-10-06, 03:19 PM	#6
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Get the factory pro one, it may even be a similer cost but better. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

03-10-06, 06:53 PM	#10
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Hmm, turns out it's 25381-19F00, "plate, gear shif" and costs $22.32. Fowlers have been telling porcupines. The K5 and 6 part is 25381-19F10... I've never seen one, but from riding K3s and K5s, and my own as standard and with the Factory Pro one, I reckon it's very similiar to the factory pro part's profiles. The detent arm is the same, I think, and will probably still have the riveted roller instead of the teeny bearing on the Factory Pro one. But it does cost a fair bit less Factory Pro one's not remotely worth the money on a road bike, IMO, unless you get the arm for £10 off Ebay including the gasket, and then you order the Evo star and as a result of a massive ****-up at the company and them taking your money for 5 months and not posting it, you get one for the price of postage. Then it's worth it __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Startrek.steve broken, SV650 broken too	startrek.steve	Bikes - Talk & Issues	31	26-08-08 12:49 PM
Curvey engine with cam swap, ignition advancer and detent arm	svrash	For Sale - SV's and SV related items	1	07-07-08 11:26 AM
Broken clutch plate	veetwin	SV Talk, Tuning & Tweaking	7	28-02-08 07:53 PM
Factory Pro shift detent arm and spring	northwind	SV Talk, Tuning & Tweaking	17	09-11-06 12:08 PM
Detent spring or something else?	haggis	SV Talk, Tuning & Tweaking	4	16-08-05 08:11 PM

03-10-06, 02:10 PM	#3
instigator Guest Posts: n/a	Cheers bud.

03-10-06, 02:55 PM	#4
instigator Guest Posts: n/a	On a side note to let anyone know, phoned fowlers to get hold of a k5 cam plate and it turns out that not only do fowlers not stock them but Suzuki haven't even designated the part with a part number so it'd need to be sorted out in Japan and be shipped over. Wasn't fowlers fault I guess....it was fowlers fault for not selling me the part whe I told them it was a 99 sv I had, not a 2005 one like I may have implied. 3 times I have used fowlers, 2 times I have been really quite cross at their attitude/policy.

03-10-06, 03:45 PM	#9
instigator Guest Posts: n/a	Not tried JHS, Northwind has kindly offered his old one up which I have accepted Kudos to that man.