tail tidys

trying to fit a R & G tail tidy to a k5s I have taken all the fairings of the back end but cannot see how to get the rest off nothing seems accessible? help what am i missing!!!!

You have to remove the undertray , in order to have access to the tail bolts!

The undertray is fixed by 4 black bolts on the outside of the sub-frame , after you remove the 4 bolts , push the plastic bits around the bolt area out and down (this is the hard part), and the undertray should get lose , giving you access to the tail bolts !

Its probably a good idea to remove the battery , and all the electrical stuff to make the job easier !

------------


This weekend i removed the tail , subframe , and tail , but when i went to put i all back together i had 3 extra bolts they are short dark brown bolts with a large tread (wood like bolts) , and look like the one used on the rear fairing above the front seat , but i couldn't find any place to put them on... since you just remove your fairing could you tell me if you know here those 3 bold go in ? thanks

as above, ive got the r+g tidy and it does fit quite well evan tho the number plate bulb is abit pants, just keep taking bits off carefully and all will become more clear.

The R&G tail tidy is a bitch to fit!

thanks for all the help on wed guys! well chuffed with myself just finishing off today looks alto better without the hunk of plastic although i did have to cut into my licence plate to make it fit

thanks