quick front sprocket Q - SV650.org

13-04-07, 08:34 AM

this will fit a faired bike wont it?
http://cgi.ebay.co.uk/Renthal-Front-...QQcmdZViewItem

13-04-07, 08:38 AM

IIRC, the only difference is the number of teeth, not the physical dimensions.

Faired (pointies at least) have 15 teeth. That has 14. Go up 2 teeth on the back as well for big air time at the front

13-04-07, 08:42 AM

im wanting a 14t but wanted to check that it would fit on a faired bike ?
i sure it will cos the engines are the same, but still feel the need to check

13-04-07, 08:45 AM

Go on, be daring...

If it doesn't fit, stick it up on the For Sale section here. Folks are always wanting 14t front sprockets.

northwind · 13-04-07, 10:09 AM

It'll fit. Assuming it's a 525 sprocket anyway, can't get on the link just now.

13-04-07, 10:40 AM

ordered

19-04-07, 12:02 PM

stupid 32mm sprocket nut

local DIY shop did'nt have one, so jumps in the car to halfords, they aint got one either

AGGGGHHHHHHHH

19-04-07, 12:51 PM

borrowed a socket but cant undo it

it is anti clockwise to undo ..is'nt it?

19-04-07, 12:57 PM

Righty tighty, lefty loosey.

Yes, anti-clockwise.

But, that there be a front sprocket nut. Might be easier if you use a gun to get the beggar off!

Failing that, breaker bar.

19-04-07, 12:59 PM

It's fuggin tight, but don't forget there is a tab washer behind the nut as well.

13-04-07, 08:34 AM	#1
hovis Guest Posts: n/a	quick front sprocket Q this will fit a faired bike wont it? http://cgi.ebay.co.uk/Renthal-Front-...QQcmdZViewItem

13-04-07, 08:38 AM	#2
Baph Guest Posts: n/a	Re: quick front sprocket Q IIRC, the only difference is the number of teeth, not the physical dimensions. Faired (pointies at least) have 15 teeth. That has 14. Go up 2 teeth on the back as well for big air time at the front

13-04-07, 08:42 AM	#3
hovis Guest Posts: n/a	Re: quick front sprocket Q im wanting a 14t but wanted to check that it would fit on a faired bike ? i sure it will cos the engines are the same, but still feel the need to check

13-04-07, 08:45 AM	#4
Baph Guest Posts: n/a	Re: quick front sprocket Q Go on, be daring... If it doesn't fit, stick it up on the For Sale section here. Folks are always wanting 14t front sprockets.

13-04-07, 10:09 AM	#5
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Re: quick front sprocket Q It'll fit. Assuming it's a 525 sprocket anyway, can't get on the link just now. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

13-04-07, 10:40 AM	#6
hovis Guest Posts: n/a	Re: quick front sprocket Q ordered

19-04-07, 12:02 PM	#7
hovis Guest Posts: n/a	Re: quick front sprocket Q stupid 32mm sprocket nut local DIY shop did'nt have one, so jumps in the car to halfords, they aint got one either AGGGGHHHHHHHH

19-04-07, 12:51 PM	#8
hovis Guest Posts: n/a	Re: quick front sprocket Q borrowed a socket but cant undo it it is anti clockwise to undo ..is'nt it?

19-04-07, 12:57 PM	#9
Baph Guest Posts: n/a	Re: quick front sprocket Q Righty tighty, lefty loosey. Yes, anti-clockwise. But, that there be a front sprocket nut. Might be easier if you use a gun to get the beggar off! Failing that, breaker bar.

19-04-07, 12:59 PM	#10
Scoobs Guest Posts: n/a	Re: quick front sprocket Q It's fuggin tight, but don't forget there is a tab washer behind the nut as well.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k6 front sprocket	DOM B	SV Talk, Tuning & Tweaking	12	18-04-09 07:12 PM
14T front sprocket	Born again	SV Talk, Tuning & Tweaking	19	02-05-07 07:39 PM
15T front sprocket	Quiff Wichard	For Sale - SV's and SV related items	1	28-04-07 10:41 PM
Front sprocket	BILLY	SV Talk, Tuning & Tweaking	3	04-09-06 07:45 PM
A Few Quick Q's (Oil change, Crash bungs & Sprocket Chan	goof	SV Talk, Tuning & Tweaking	8	19-06-05 10:00 PM